- Posts: 1131
- Thank you received: 526
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
Obtained a D6C 10K in SE Tx
4 years 1 month ago #222634
by gauntjoh
John Gaunt, ACMOC Director, UK
Replied by gauntjoh on topic TEST reply to old posts
Obtained a D6C 10K in SE Tx
John Gaunt, ACMOC Director, UK
Please Log in or Create an account to join the conversation.
4 years 1 month ago #222664
by davo727
SE Tx
D6C 10K
Replied by davo727 on topic TEST reply to old posts
Learned a little lesson. I had run over a small pine and it sprung back up just enough to point right at the screen and I didnt look behind me before backing up. It had broken off at this time so it wasnt coming in any further.
SE Tx
D6C 10K
Please Log in or Create an account to join the conversation.
4 years 1 month ago #222666
by gauntjoh
John Gaunt, ACMOC Director, UK
Replied by gauntjoh on topic TEST reply to old posts
Well, it looks like you can reply to the thread now, we’ve just got to get the thread title restored - we are working on this.
John Gaunt, ACMOC Director, UK
The following user(s) said Thank You: davo727
Please Log in or Create an account to join the conversation.
4 years 1 month ago #222676
by B4D2
Replied by B4D2 on topic TEST reply to old posts
John, I believe I've restored the thread title.
Please Log in or Create an account to join the conversation.
4 years 1 month ago #222677
by gauntjoh
John Gaunt, ACMOC Director, UK
Replied by gauntjoh on topic TEST reply to old posts
Yes you have Bruce, Thank you.
John Gaunt, ACMOC Director, UK
Please Log in or Create an account to join the conversation.
4 years 1 month ago #223038
by davo727
SE Tx
D6C 10K
Replied by davo727 on topic TEST reply to old posts
My serial number tag was severely corroded when I got the Cat, I was able to just make out the serial number but none of the other option numbers.
Would Caterpillar company have archive info on what this was equipped with and the numbers so I can have a replacement tag made?
It is a 10K and I believe a 1974.
Would Caterpillar company have archive info on what this was equipped with and the numbers so I can have a replacement tag made?
It is a 10K and I believe a 1974.
SE Tx
D6C 10K
Please Log in or Create an account to join the conversation.
4 years 1 month ago #223045
by Rome K/G
Replied by Rome K/G on topic TEST reply to old posts
If you remove the tag it will be stamped underneath.
Please Log in or Create an account to join the conversation.
4 years 1 month ago #223081
by davo727
SE Tx
D6C 10K
Replied by davo727 on topic TEST reply to old posts
Thanks, I will drill it off shortly.
SE Tx
D6C 10K
Please Log in or Create an account to join the conversation.
4 years 3 weeks ago #223423
by davo727
SE Tx
D6C 10K
Replied by davo727 on topic TEST reply to old posts
I called a Houston Cat dealer and asked about sprocket segments and they told me they were discontinued, so I will check on aftermarket. I know theres a couple of independant track shops around houston, or I can have shipped from wherever. Should I buy new segment bolts too?
SE Tx
D6C 10K
Please Log in or Create an account to join the conversation.
Time to create page: 0.184 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
support@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N