great pictures and learning a lot. you must be getting your exercise climbing up and down off the engine.

thansk
KoO
Published Author

More pictures the better .
firekat:)

Actually did some work on the beastie today...

Picture 1 shows the cleaned and repaired oil gallery (the brass bit) installed.

Picture 2 shows the fuel rack on the way in.

3 shows the rack installed

4 shows the govenor assembly

5 is all you need to stuff cylinders!

6 shows rings going on... That's my able bodied assistant Otis...

7 shows the compressor and pre-whack stage.

8 shows the finished, ready to install product.

9 and 10 show how we have to attach the pistons to the rods. The big-end of the rod won't fit throught the bore, so this really is the easy way... Just gotta be careful not to push the piston down too far!

11 Ta-dah! 1/4 done....

More to come..


PS I had to delete the old pics to make space for these...

hello Locodriver,thank you for the pic ,good to see coming along ,
i use photbucket to store pic ,its free and easy to use ,
bruce oz



photobucket.com/