acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D4 7J main clutch

More
1 year 5 months ago #249024 by Tad7561
Replied by Tad7561 on topic D4 7J main clutch
My D2 pull the disk in the second picture as is, the first picture with the TD6 is the 10’ disk I’ll need the D4 for.

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #249035 by trainzkid88
Replied by trainzkid88 on topic D4 7J main clutch
for fire breaks we used a 6ft 3pl back blade on the back of the ford and a set of drag pasture harrows behind that. the idea was just to remove the surface vegetation to bare dirt. a couple of passes gave a nice fire break. of course we had a much wider area slashed and the tree line in further than that.

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #249052 by Tad7561
Replied by Tad7561 on topic D4 7J main clutch
Thanks for the idea, I would need to get our ford running. Here’s one of my D2 pulling the 7’ offset 
Attachments:

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #249053 by trainzkid88
Replied by trainzkid88 on topic D4 7J main clutch
even just keeping it slashed and no tall vegetation within 30metres of buildings helps if it does catch fire its easier to control. and hazard reduction burns. by removing fire almost completely from the environment we have created our own disasters.

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Go to top