I'm making my Christmas wish list. I have a 1947 D4 6U with #41 hydraulics and toolbar blade/ripper, and a 2 speed pto.
I'd like to buy the following:

grill guard for the #41 front mounted hydraulics
2 brackets for the guard, 3H 5360 is the part number.
rear ripper attachment for the rear toolbar
belt pulley attachment for the rear 2 speed pto

Alternatively, and more ideally, if I could find a complete #44 front mount hydraulic setup with a set of rear lines for a CAT with the fender mount fuel tank, that would be awesome.

I have the following parts to offer as a partial trade, or will buy outright:

battery box, no lid, or battery hold brackets
mole for ripper
rear toolbar clevis brackets
Nelson muffler for the diesel motor
rear toolbar coil shank chisels (I'm not sure what they are called)
lower frame rollers
Misc old style gauges that still work, but are faded
grill guard, not sure what model its for but its not for a #41 hydraulic system

Ive added a picture of the grill guard I have, not sure what model its for, but definitely not a D4 with 41 hydraulics. the box on the left side was added by someone.

Also, here is a picture of my 6U. Im looking for the belt pulley that attaches to the existing 2 speed pto. There is a gear that attaches to the splined pto shaft, that the whole unit just bolts on the pto gearbox.

Doesn’t Ag-Mike have these goodies available?

Mike, I would be interested in 1 short and one long coiled field cultivator shank (coiled shank chisels). Pm me a picture or post here. thanks
Chuck C
847 508 737eight

If the gauges work and the glass is not broken I may have a go

what shape are the rollers in?

Is Nelson just a brand of muffler or original type with water trap?


Howdy neighbor

"juiceman" wrote:

Doesn’t Ag-Mike have these goodies available?

Nope, i unloaded all my cat toolbar stuff. only got a complete ih t-bar setup for the 6 and 9 t-bar crawlers. 6 and 9 ih t-bar crawlers are really uncommon. Mr crowe should provide photos of the field cultivator coil shanks with hardware as the cat 1's are really uncommon too. Most out there are j-deere made by killifer. Killifer made it for cat too but more h-d, especially the mounting hardware.

Fender tank tractors aren't suppose to have 41 hydraulics or toolbar setups from the factory.... that was custom aftermarket install by a dealer. I have 1 too.

"Chuck wrote:

Mike, I would be interested in 1 short and one long coiled field cultivator shank (coiled shank chisels). Pm me a picture or post here. thanks
Chuck C
847 508 737eight

Chuck, "Front and rear" cultivator coils, (1 inch square).

Cat t-bar field cultivator video.

Mr. Crowe: I’d be interested in the 2 1/4” tool bar clamp/brackets if still available.
Thanks! JM

Chuck, here is a picture of the chisels I have. Some have the brackets still, but the previous owner cut the bolts. I have two short, two long. the short ones are only partially in the picture, operator error on my part. $150 for all 4, otherwise, $50 each.

Michael, I will take all 4. PM me with your address so I cam mail you a check. I am in northern Illinois, can you ship them?
Thanks
Chuck C

Chuck, I sent you a pm.