The hole in the arm that attaches to the shaft that goes down into the main clutch assembly is egged out pretty badly. The entire linkage from the main clutch lever to the arm is also worn. I am looking for the main arm that clamps to the vertical shaft going down into the clutch housing, and as many other parts of the exterior linkage as I can find.

Anyone with D2 clutch linkage parts that aren't totally worn out?

Thanks.

You can also have the holes wire welded shut and drill new holes.

Yeah. That's definitely the next step. I was just hoping to find a set of external linkages that were in decent shape.

Thanks.

"rhartwick" wrote:

Yeah. That's definitely the next step. I was just hoping to find a set of external linkages that were in decent shape.

Thanks.

Parts are out there, please add pics, ser# of tractor, or individual part# for the guys that might help you. Remember the old song " the hip bones connected to the--- leg bone"? Use pelvis and femur, it is better to ID parts that-a-way because of serial number differences.

Good point. SN is 5U 11669. From the parts book, the arm is pn 483782 and appears to be the same for all the 5U's.

I'll probably wind up just pulling the lever arm and linkage and try to weld/drill a new hole without so much slop, but in case anyone has one lying around, I would still be interested in buying one in better condition.

Thanks.

Have one in Rochester, NY call me Jeff 585-729-0000 Part# 4B3782, I believe it's a "B" not a 8

FP Smith Equipment Company has several 4B3782 on the shelf. Phone 707-312-7014I have had good luck working with them on parts.
Have a good day...…….Bill