acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

7 U D4 parts

More
6 years 7 months ago #183048 by willwingo
7 U D4 parts was created by willwingo
7U D4 D 315 engine and starter motor, serial # 7U 40602, 44 hydraulic unit with guard, other stuff:



Complete running take out D 315 engine and electric start starting engine. This is a complete engine that runs great. Oil pressure in the green hot and cold, fuel pressure in “run” range and oil pressure also in the green on the starting engine, full pressure when running, everything included from the fan through the flywheel;

Hour meter shows 07461 (very difficult to read) but I think that is low. Engine had a valve job just before the tractor was wrecked. Starter motor has <.005 end play at the flywheel and starts immediately. Starting engine also had work done just before the wreck. This is a non- oil cooler engine from the factory, seems to slobber a little out the stack, has not been run under load for years.

The 44 hydraulic unit is quiet and works the 4 A cylinders fast and powerfully. The guard has no visible grrs;

Complete crankcase guard group with pull hook group, drawbar group;

Seat type fuel tank and tool box, complete with 2 small grrs.

Located in NW Pennsylvania. All parts will be removed from the tractor and I will load on your truck or trailer.

More pictures soon or tell me what you want to look at and I’ll send good digital images direct.

All much too good to go to the scrapped.

Contact via PM on this board or call:
814 827 2626
Attachments:

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago #183049 by bursitis
Replied by bursitis on topic 7 U D4 parts
PM sent about crank case guard group

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #184013 by Christopher
Replied by Christopher on topic 7 U D4 parts
Message sent about the tank.

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #184014 by D4C Charlie
Replied by D4C Charlie on topic 7 U D4 parts
seems like those 5 roller track frames and the large disc idlers would be popular.

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #184021 by neil
Replied by neil on topic 7 U D4 parts
Curious as to why such a late serial # tractor was wrecked?

Cheers,
Neil

Pittsford, NY

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #184053 by JoeG
Replied by JoeG on topic 7 U D4 parts
If this is the tractor I believe it is, the opposite side roller frame is bent from a fall off a lowboy the previous owner had happen. Phildirt can correct me if I am wrong. The last time I saw it there was a nice original Fleco canopy on it too if it is in fact the same tractor. I'd be interested in most of that the undercarriage if it was available.

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #184101 by willwingo
Replied by willwingo on topic 7 U D4 parts
JoeG is correct on the tractor, it took a hard hit coming off a low boy at about 40 mph. Did a complete end-over-end flip over an oncoming car. Chain binder broke and started the whole chain of events.

This is the other side:



This is the front guard:



This is the tank/ seat combination:



The under carriage and tracks are staying here.

Both engines and the 44 hydraulic system are still available.

The crankcase guard group and hook are gone as is the hood and winch.

Will Wingo
814 827 2626

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #184145 by neil
Replied by neil on topic 7 U D4 parts
Ah that's a shame. Looked like a nice unit too. Still, it'll go on to provide a future for other machines

Cheers,
Neil

Pittsford, NY

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #184978 by willwingo
Replied by willwingo on topic 7 U D4 parts
Moving thread up.

Added a few more items:

These manuals go as a set. The have plenty of stains, the Operators Manual is the worst but is easily readable and is not missing any pages.



The left side plate has been cut on the bottom so it can be installed/ removed without messing with the crank guard bolts. The right hand plate has a couple or grr's but is not bad.
The radiator/ 44 guard is real nice and includes the bolts (4) and spacers (2).








The 44 pump and tank look and work great.

The engine/ 44 pump/ radiator/ both engines through and including the flywheel will go together.

Send me a PM with your email for prices or call 814 827 2626

Will Wingo

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #185453 by ironman3406
Replied by ironman3406 on topic Interested in parts
I sent you a PM of some parts I am interested in off you D4.

Thanks
Nate

Nathan Duncan

Please Log in or Create an account to join the conversation.

Time to create page: 0.199 seconds
Go to top