I needto make a simple guard that bolts onto the back of the d315 flywheel housing. its made of rolled angle with a piece of rolled 14 gauge welded to it. It goes all the way around the housing and the cast pinion cover is coped into it. It looks like i can figure a od from where the old guard was bolted on.
I can get the rolled angle made from mcmaster-carr but he wants "sae" information having the holes drilled for me. Is there any way to find a cat drawing for guard p/n 6f1513?
thanks for any help.

SAE bell housing info is fairly easy to determine with a tape measure.

here is a couple of links link to referneces that tell how to measure and determine your SAE bell housing:


garbee.net/~cabell/december/SAEchart.gif
www.merequipment.com/sae-housings-and-drive-plate-sizes.aspx

hope this helps.

Got it figured out, thanks

"rmyram" wrote:

SAE bell housing info is fairly easy to determine with a tape measure.

here is a couple of links link to referneces that tell how to measure and determine your SAE bell housing:


garbee.net/~cabell/december/SAEchart.gif
www.merequipment.com/sae-housings-and-drive-plate-sizes.aspx

hope this helps.