will this fit a d6 9u??????

thansk

Hi KoO,
You must be looking at the casting #2B5975 as the part number would be #2B5976. This fits the early D6 (5E, 2H) models and as far as I can tell it would not fit the 9U because of the later hub change. The farthest back the 9U sprocket will interchange is 4R2266 or 5R3332 as near as I can tell. If anyone has more info. please chime in.

thansk, went out and measured the hubs and they are different sizes, oh well it is not my lucky day, LOL

thansk

well old magnet, i think i'm in a bind here. got a cat in the shop and just need to pop the sprocket and then have the whole machine back together and out of the shop in a week. now the nearest spocket is 1000 kms from here (used and not sure if it is worse then mine) plus it could be money and a week of waiting. so i think i'll be working my magic with the good sprocket and the old one.

after supper will count the teeth and think hard on the pitch thing.

thansk

Hi KoO,
Track pitch on all the old D6's are the same @ 6.75 in. If you've got a good sprocket hub you can always swap the rim if you have to. If the mounting hub is bad that's a whole different story.

excellent but i found out it is 1" in diameter shorter, so that works out to one tooth short.

head to THE HOOD thread and see what i'm doing, you will cry or smile, LOL

thansk