D8 2U rail height specs

CAT RD-7
Topic Author
Offline
Senior Boarder
User

15 years 11 months ago #23567 by CAT RD-7

D8 2U rail height specs was created by CAT RD-7

I'm looking at a D8 2U and the rail height is 4 5/8 inches. What should the rail height be when the rails are new? What is the percentage rate on these rails at 4 5/8 inches?

Please Log in or Create an account to join the conversation.

English Al
Offline
Senior Boarder
User

15 years 11 months ago #23573 by English Al

Replied by English Al on topic Link Height

RD-7, it depends on the link numbers but here's a couple of measurements
link * 2H953/4 - new link height 4.75" - 100% worn 4.38"
7H3799/800 - new link height 4.88" - 100% worn 4.55"
Hope this helps. cheers Al

Please Log in or Create an account to join the conversation.

Old Magnet
Offline
Platinum Boarder
Member

15 years 11 months ago #23574 by Old Magnet

Replied by Old Magnet on topic D8 2U rail height specs

Can you get a link part #?....I show three different height rails that were available. The oldest (and lowest orig. height) is a 2H953-54)......started out at 4.75 in. and .37 allowable
% worn = amt. worn/allowable = 34% worn in this case.

Please Log in or Create an account to join the conversation.

CAT RD-7
Topic Author
Offline
Senior Boarder
User

15 years 11 months ago #23576 by CAT RD-7

Replied by CAT RD-7 on topic D8 2U rail height specs

I can get a part number one of these days for the link. These are the early style rails that the 1H's, 8R's and 2U's had.

Please Log in or Create an account to join the conversation.

CAT RD-7
Topic Author
Offline
Senior Boarder
User

15 years 11 months ago #23577 by CAT RD-7

Replied by CAT RD-7 on topic D8 2U rail height specs

So is there 3 different rail heights for the same pitch rails?

Please Log in or Create an account to join the conversation.

Old Magnet
Offline
Platinum Boarder
Member

15 years 11 months ago #23580 by Old Magnet

Replied by Old Magnet on topic D8 2U rail height specs

Yes, all three are for 8 in. pitch.
Two have been covered, the third is a #1S8839 & 40
New height is 4.97 in. allowable wear is 0.380 in.

Please Log in or Create an account to join the conversation.

CAT RD-7
Topic Author
Offline
Senior Boarder
User

15 years 11 months ago #23602 by CAT RD-7

Replied by CAT RD-7 on topic D8 2U rail height specs

Thanks for your help...It looks like I need to get the part number off of the links to get an accurate figure...

Please Log in or Create an account to join the conversation.

ACMOC

Antique Caterpillar Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

support@acmoc.org

Chapters History Events Members Contact

Member Quick Links:

Store Forum

Become a Member!

"I became a member recently because the wealth of knowledge here is priceless."
- Chris R

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N

ACMOC Membership Benefits

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D8 2U rail height specs

ACMOC