- Posts: 857
- Thank you received: 0
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
Old Mag
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 1 week ago #22939
by Old Magnet
Replied by Old Magnet on topic Old Mag
Hi Willie,
Sorry, I don't have anything that shows that part number but could very well be a late number. May even be a number for wet back end shoes.
On the other hand if they fit the rivet pattern and are 1/4 in. thick and overall same size they probably will work. If the number is for wet shoes they are a different composition.
Sorry, I don't have anything that shows that part number but could very well be a late number. May even be a number for wet back end shoes.
On the other hand if they fit the rivet pattern and are 1/4 in. thick and overall same size they probably will work. If the number is for wet shoes they are a different composition.
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 1 week ago #22942
by Old Magnet
Replied by Old Magnet on topic Old Mag
Thanks Josh,
Where did you find that number?
Where did you find that number?
Please Log in or Create an account to join the conversation.
16 years 1 week ago #22945
by josh
Pete,
I used Regal Corp's web site to check on the availability of the part, they will tell what they have available, along with the updated part number, same thing works with Cat, Heavyquip, American Crane and Tractor. etc. Some of the sites an account is needed and some not.
I used Regal Corp's web site to check on the availability of the part, they will tell what they have available, along with the updated part number, same thing works with Cat, Heavyquip, American Crane and Tractor. etc. Some of the sites an account is needed and some not.
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16724
- Thank you received: 820
16 years 1 week ago #22946
by Old Magnet
Replied by Old Magnet on topic Old Mag
Thanks Josh,
I frequently use the Heavyquip site but didn't get around to that yet. Kept following the model chain of D6's and 5's in the parts books but didn't get to that number.....thought maybe you had the NPR or other access.
I frequently use the Heavyquip site but didn't get around to that yet. Kept following the model chain of D6's and 5's in the parts books but didn't get to that number.....thought maybe you had the NPR or other access.
Please Log in or Create an account to join the conversation.
Time to create page: 0.168 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
support@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N