HomeJoin / RenewChaptersEventsMembersForumAbout
ScholarshipsMachinesDonateYouTube Watch HereGet the FREE Newsletter
acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

  1. Forum
  3. Antique Caterpillar Machinery Owners Club
  5. DISCUSSION
  7. Cutting edge part numbers

Cutting edge part numbers

More
2 days 23 hours ago #260912 by 1972RedNeck
Cutting edge part numbers was created by 1972RedNeck
9S blade 53C serial number. Need current part numbers for the cutting edge and corner bits. 1J0019 doesn't cross to anything on Cat's online parts catalog.

Looking for the thickest and heaviest available. Don't care if the cutting edge is one piece or multi piece.

Please Log in or Create an account to join the conversation.

More
2 days 19 hours ago - 2 days 19 hours ago #260918 by seiscat
Replied by seiscat on topic Cutting edge part numbers
Cutting edge 1-5/8 thick is 2 piece 7J2962. End bits are 1-5/8 7J3461-2 or forged 5J1279-80
Craig
 
Attachments:
Last edit: 2 days 19 hours ago by seiscat. Reason: Add photo
The following user(s) said Thank You: 1972RedNeck, Busso20

Please Log in or Create an account to join the conversation.

More
2 days 14 hours ago #260922 by 1972RedNeck
Replied by 1972RedNeck on topic Cutting edge part numbers
I appreciate it, but the corner bits are most definitely left and right specific. That chart only has one part number listed...

Please Log in or Create an account to join the conversation.

More
2 days 12 hours ago #260927 by seiscat
Replied by seiscat on topic Cutting edge part numbers
You don't know how to read the part numbers. The end bits are 7J3461 AND 7J3462 and the forged ones 5J1279 AND 5J1280!
The following user(s) said Thank You: 1972RedNeck

Please Log in or Create an account to join the conversation.

More
2 days 12 hours ago #260929 by seiscat
Replied by seiscat on topic Cutting edge part numbers
Odd numbers are for the left side, even numbers are for the right. 
Craig 

Please Log in or Create an account to join the conversation.

More
2 days 1 hour ago #260932 by seiscat
Replied by seiscat on topic Cutting edge part numbers
I hope you found the proper numbers. My last responses were short and didn't explain why the part numbers are listed in this manner. 
Caterpillar provided customers with the "One Safe Source" catalogs for free. They tried to condense everything to conserve space.
I don't usually respond to posts from my telephone as I try to use the fewest words possible. I hope I wasn't too abrupt.
Craig
 

Please Log in or Create an account to join the conversation.

More
1 day 23 hours ago #260938 by 1972RedNeck
Replied by 1972RedNeck on topic Cutting edge part numbers
Not at all. I appreciate the help. I was confused by dashed part numbers as that's not how Cat does part numbers. It all makes sense now.

Thank you for the help 

Please Log in or Create an account to join the conversation.

More
1 day 22 hours ago #260941 by josh
Replied by josh on topic Cutting edge part numbers
1J19 crosses to 5J6802, which is a cutting edge consisting of, one 5J6800 and two 5J6806, used on the 53C and 21E.
The following user(s) said Thank You: seiscat

Please Log in or Create an account to join the conversation.

More
1 day 22 hours ago #260942 by seiscat
Replied by seiscat on topic Cutting edge part numbers
The thicker version (1-5/8") of that 5J6802 is the 7J2961 (center) and 7J2960 (2 ends)
Craig

Please Log in or Create an account to join the conversation.

More
1 day 15 hours ago #260952 by Busso20
Replied by Busso20 on topic Cutting edge part numbers
Seiscat, I never knew odds left even is right, thank you Ill remember that one

Please Log in or Create an account to join the conversation.

  1. Forum
  3. Antique Caterpillar Machinery Owners Club
  5. DISCUSSION
  7. Cutting edge part numbers
Time to create page: 0.173 seconds
Go to top