acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D4d 83j service meter lens.

More
10 months 3 weeks ago #253581 by Baker1184
My soda can style service meter is leaking fuel out of its lens. I order a lens kit 1p4923 but the screw pattern was to narrow and it had corse thread screws. On my hour meter the screws are almost to the edge of the lens. Does anybody know the correct parts number for the lens kit for my meter.

I believe it has a d330c engine?

Thanks

Please Log in or Create an account to join the conversation.

More
10 months 3 weeks ago #253590 by bruce oz
on this kit says lens not part of group  
Attachments:

Please Log in or Create an account to join the conversation.

More
10 months 3 weeks ago #253597 by Old Magnet
Need the actual tractor s/n and/or a picture would help identify as there are a few variations.

Please Log in or Create an account to join the conversation.

More
10 months 3 weeks ago #253605 by Baker1184
The serial number is 83j422

Please Log in or Create an account to join the conversation.

More
10 months 3 weeks ago #253607 by Baker1184
 
Attachments:

Please Log in or Create an account to join the conversation.

More
10 months 3 weeks ago - 10 months 3 weeks ago #253633 by Old Magnet
As near as I can tell  that service meter takes a Kit #8S8199 consisting of window, gasket and screws.
To solve the leakage you need to replace 8S5573 seal on the service meter drive shaft.
Are you seeing any leakage (dripping) from the transfer pump tell tale drain line?If so might want to change the two 4S7756 seals as well.
Last edit: 10 months 3 weeks ago by Old Magnet.

Please Log in or Create an account to join the conversation.

More
10 months 3 weeks ago #253635 by Baker1184
Thank you. I ordered all three of the seals and the gasket for the transfer pump.

Please Log in or Create an account to join the conversation.

Time to create page: 0.160 seconds
Go to top