acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Need Fuel Filters

More
1 year 3 weeks ago #252290 by RUSSCPA
Need Fuel Filters was created by RUSSCPA
I have a 1954 D6-9U in really good condition that at one time was purchased new by my wife's grandfather.
I would like to replace the fuel filters and the gasket. The serial number for the machine is 9U-15595.
Any help  in locating the filters and the gasket would be greatly appreciated. 
Thanks
Gary Russell
 
The following user(s) said Thank You: ChrisRoyd2

Please Log in or Create an account to join the conversation.

More
1 year 3 weeks ago #252293 by Elton
Replied by Elton on topic Need Fuel Filters
Gary,

First, try to find a parts book then check your CAT dealer for a quote. After that, try NAPA. With the older machines sometimes you have your wants but need to settle for what is available. I'd bet that CAT has what you need and likely not too horribly priced.

Elton
The following user(s) said Thank You: RUSSCPA

Please Log in or Create an account to join the conversation.

More
1 year 3 weeks ago #252296 by trainzkid88
Replied by trainzkid88 on topic Need Fuel Filters
there is a couple of different filters some are a cartridge others are a string wound. both styles where available from the dealer a few years back when we changed them on our d4 which is a u series machine so around the same age. take the top off the filter tower and see which ones you have.
and if you dont have one get yourself a copy of the parts book covering your serial number.

the serviceman reference and owners maintenance instruction(owners book) are essential books too

to get any help from the dealers you need the part numbers becuase many of them dont have the books for the old gear anymore. but they can search by part number and find stock that way.
The following user(s) said Thank You: RUSSCPA

Please Log in or Create an account to join the conversation.

More
1 year 3 weeks ago #252301 by seiscat
Replied by seiscat on topic Need Fuel Filters
I found these on ebay:
This is the best deal on a parts book I have seen
www.ebay.com/itm/155675371404?
The operation and maintenance instructions is full of important information.
 www.ebay.com/itm/266422284215
Craig
The following user(s) said Thank You: RUSSCPA

Please Log in or Create an account to join the conversation.

More
1 year 2 weeks ago #252528 by RUSSCPA
Replied by RUSSCPA on topic Need Fuel Filters
OK. Called Boyd Cat, they were extremely helpful. Part number of 788264 had changed 3 times into number 489-3196.
Ordered four filters and a gasket. I have the new filters and they appear to be longer than the filters on the machine.
Any one have some input if I have the correct filters?

Please Log in or Create an account to join the conversation.

More
1 year 1 week ago #252533 by trainzkid88
Replied by trainzkid88 on topic Need Fuel Filters
if memory serves they are placed on sleeves and held in position with springs and washers if there the string wound type so its possible the old ones have "settled" a bit. well that is how the d4 was. cat used similar designs for all machines just bigger machines were bigger parts.

Please Log in or Create an account to join the conversation.

Time to create page: 0.168 seconds
Go to top