- Posts: 50
- Thank you received: 6
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
933f clutch pack installation
1 year 6 months ago #248375
by Arkie
933f clutch pack installation was created by Arkie
I've been away from my project loader for a while and diving back in. I'm installing the clutch packs and the manual says to press them on to 12-15 tons. With no access to a press capable of doing this, is there a "poor man's" way to do this? I've contacted Caterpillar and they don't rent tools.
As always, I sure appreciate any input.
As always, I sure appreciate any input.
Please Log in or Create an account to join the conversation.
1 year 6 months ago #248376
by Rome K/G
Replied by Rome K/G on topic 933f clutch pack installation
Where you located?
Please Log in or Create an account to join the conversation.
1 year 6 months ago #248381
by Arkie
Replied by Arkie on topic 933f clutch pack installation
Northeast Arkansas U.S.A
Please Log in or Create an account to join the conversation.
1 year 6 months ago #248383
by Rome K/G
Replied by Rome K/G on topic 933f clutch pack installation
ooh, a little far of drive for me, sorry.
Please Log in or Create an account to join the conversation.
1 year 6 months ago #248384
by Arkie
Replied by Arkie on topic 933f clutch pack installation
Thank you Rome for responding. I'm positive these have had the clutch packs have been installed without 12-15 tons being pressed on them. Successful? I don't know know, but leery of not doing it. I'm tempted to rattle the nut with a 3/4 impact but nut sure the nut and spindle will take the torque.
Please Log in or Create an account to join the conversation.
1 year 6 months ago #248386
by Rome K/G
Replied by Rome K/G on topic 933f clutch pack installation
That wont do it, either have Cat do it or find pump with gauge, press and tooling.
Please Log in or Create an account to join the conversation.
1 year 6 months ago #248412
by Arkie
Replied by Arkie on topic 933f clutch pack installation
That's what I needed to hear. Thank you Rome!
Please Log in or Create an account to join the conversation.
Time to create page: 0.307 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
support@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N