looking for the dimensions on a pump lifter gauge

ccjersey
Offline
Platinum Boarder
User

5 years 2 weeks ago #207860 by ccjersey

Replied by ccjersey on topic looking for the dimensions on a pump lifter gauge

I didn't think the pump would fit on the drive tang the wrong way. Always heard the tang and slot were offset, but I don't know for sure.

I know the common RoosaMaster/Stanadyne rotary pumps WILL install either way on the drive tang, have done that myself.

D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time:D

Please Log in or Create an account to join the conversation.

chriscokid
Topic Author
Offline
Platinum Boarder
Member

5 years 2 weeks ago #207872 by chriscokid

Replied by chriscokid on topic looking for the dimensions on a pump lifter gauge

"ccjersey" wrote:
I didn't think the pump would fit on the drive tang the wrong way. Always heard the tang and slot were offset, but I don't know for sure.

I know the common RoosaMaster/Stanadyne rotary pumps WILL install either way on the drive tang, have done that myself.

after a better inspection you are correct it can not be install but in one position.

Please Log in or Create an account to join the conversation.

STEPHEN
Offline
Platinum Boarder
User

5 years 1 week ago #208291 by STEPHEN

Replied by STEPHEN on topic looking for the dimensions on a pump lifter gauge

If you haven't got this far yet,, it's gonna be a beautiful tractor!!

Please Log in or Create an account to join the conversation.

Jack
Offline
Platinum Boarder
Member

5 years 1 day ago #208536 by Jack

Replied by Jack on topic looking for the dimensions on a pump lifter gauge

I made a base for my dial indicator and a drilled block with which to establish a "zero" point on the dial, then used the depth mic method.

Please Log in or Create an account to join the conversation.

LAOL
Offline
Senior Boarder
Member

7 months 1 week ago #256109 by LAOL

Replied by LAOL on topic looking for the dimensions on a pump lifter gauge

I know this is an old topic, but does anybody have the numbers for a D4400 engine? It is on a 4G series D4. I don't really want to assume that they are the same.

2F 1S 4G (x5) 7J (x2) 5T (x2) 6U 7U (x3)

Please Log in or Create an account to join the conversation.

Old Magnet
Offline
Platinum Boarder
Member

7 months 1 week ago #256113 by Old Magnet

Replied by Old Magnet on topic looking for the dimensions on a pump lifter gauge

Per rack setting chart....

Please Log in or Create an account to join the conversation.

LAOL
Offline
Senior Boarder
Member

7 months 1 week ago #256114 by LAOL

Replied by LAOL on topic looking for the dimensions on a pump lifter gauge

Thank you, greatly appreciate the help.

Looks like 1.735 is the magic number!

2F 1S 4G (x5) 7J (x2) 5T (x2) 6U 7U (x3)

Please Log in or Create an account to join the conversation.

ACMOC

Antique Caterpillar Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

support@acmoc.org

Chapters History Events Members Contact

Member Quick Links:

Store Forum

Become a Member!

"I became a member recently because the wealth of knowledge here is priceless."
- Chris R

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N

ACMOC Membership Benefits

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

looking for the dimensions on a pump lifter gauge

Attachments:

Attachments:

ACMOC