acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D6 Fuel Injector Question

More
16 years 9 months ago #13525 by sodbuster25
I have a 1952 D6 with the D318 engine. I dont know where the seals go in the injector. I know there is one o ring that goes on the outside of the nut that holds the injector into the precombustion chamber, but I am not sure if there is a seal between the nut and the injector itself. I took the injectors to CAT to get them tested and they removed all the seals and I dont remember how they go. Thanks, Josh

Please Log in or Create an account to join the conversation.

More
16 years 9 months ago #13527 by SJ
Replied by SJ on topic Seals
Yes there are 2 seals at the top and the one under the fuel line nut is 6F1069 and the one under the nut that secures the nozzle down in is 5B3718. Torque the nozzle down in at about a 105 lbs.The nozzle itself gets tightened finger tight to the nozzle body.

Please Log in or Create an account to join the conversation.

More
16 years 9 months ago #13531 by Old Magnet
Like so......

Please Log in or Create an account to join the conversation.

More
16 years 9 months ago #13541 by sodbuster25
Thank you, Josh

Please Log in or Create an account to join the conversation.

Time to create page: 0.144 seconds
Go to top