D4 7U 315 injection pump lifter setting

Suomalainen
Topic Author
Offline
Junior Boarder
User

16 years 11 months ago #11355 by Suomalainen

D4 7U 315 injection pump lifter setting was created by Suomalainen

Would any one know what the injection pump lifter setting is on a D4 7U 315 engine? There was a previous discussion on a RD4 as being 1.734 but expect it might be different on the 7U series.

Please Log in or Create an account to join the conversation.

Old Magnet
Offline
Platinum Boarder
Member

16 years 11 months ago #11357 by Old Magnet

Replied by Old Magnet on topic D4 7U 315 injection pump lifter setting

Not much different:)

Specs show1.736 in. for the 6U/7U.

Please Log in or Create an account to join the conversation.

Suomalainen
Topic Author
Offline
Junior Boarder
User

16 years 11 months ago #11362 by Suomalainen

Replied by Suomalainen on topic Thanks Old Magnet

Thank you Old Magnet for the 7U injection pump spec's. It is sure good to have you around.

Please Log in or Create an account to join the conversation.

SJ
Offline
Platinum Boarder
User

16 years 11 months ago #11368 by SJ

Replied by SJ on topic Settings

The .001 or .002 less won,t hurt anything & I usually set them at 1.735 & it would account for a little wear on the bottom of the pump plunger or even the screw surface.

Please Log in or Create an account to join the conversation.

Suomalainen
Topic Author
Offline
Junior Boarder
User

16 years 11 months ago #11372 by Suomalainen

Replied by Suomalainen on topic D4 lifter settings

And thank you also Senior Member your advice is much appreciated.

Please Log in or Create an account to join the conversation.

ACMOC

Antique Caterpillar Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

support@acmoc.org

Chapters History Events Members Contact

Member Quick Links:

Store Forum

Become a Member!

"I became a member recently because the wealth of knowledge here is priceless."
- Chris R

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N

ACMOC Membership Benefits

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D4 7U 315 injection pump lifter setting

ACMOC