Wanted Cat Thirty hand crank

Still looking. Thanks Jim

Jim, This is and has been a commonly asked for part. It was on the to do list for 2016, but did not happen due to other castings being needed. I think now would be a good time for me to get my pattern maker on this. I suspect it will be June before I have some ready to go. Now would be the time to pre-order so that I have you covered in the first round. Call, text or email me with your needs. Thanks and have a great day!!

307-760-8483
[email protected]

Hi Jim, I should have ten crank handles to suit the Thirty sitting at Droptubes place in Oregon though they may need the grips fitted, I have those there too, can't recall if the cranks had been threaded to accept the grips, I'll get hold of Scott and ask him, these were in with all the parts I bought from John Matta back in 2014 when he quit selling his remanufactured Cat bits.
Regards
Mike

Thanks Mike let me know what you have.

Will do, I've sent a email to Scott.

You might try Steve Fonseca - 530-701-1775
I don't know if he has extra or parting out some of his.
cts

I will give him a call. Thanks

Tractor Doctor,
Mike has one here in Oregon, if you still need.
Thanks, Scott

Were you able to get a 30 crank? I have a thirty and have a local foundry casting 6 right now. I should look more often at the board, a lot of helpful things here and I have some things I could help some other members with. Cranks should be machined and ready in about 30 days.