ACMOC
Login
ACMOC

PCU's

Showing 1 to 10 of 11 results
1
mrsmackpaul
Topic Author
Offline
Send a private message to mrsmackpaul
Posts: 1,456
Thank you received: 0
Im having a clean up and wondering if anyone wants some PCU's
I have a front PCU off a D6 D and a rear letourneau DD PCU and also have the gantry for a D7 as well to suit I think 7M 3T - 17A
A hard nose off a D7 E

Am heading down for the AGM in Brisvegas for chapter 18 if anyone is interested let me know and I will run them down and drop them off at the meeting

I pulled the DDPCU off my old 7 last night and was working last night before I pulled it off

The front PCU I have never used but was told it was ok when I got it some years back

Also have the letourneau blade if someone wants that it has had the flat Trunions changed to the ball type cat ones but other wise is complete and has a good cutting edge and I dont think it has any holes either maybe a patch or two I havent seen it up close for some time now

[attachment=43523]IMG_3908.jpg[/attachment][attachment=43524]IMG_3909.jpg[/attachment][attachment=43525]IMG_3910.jpg[/attachment][attachment=43526]IMG_3911.jpg[/attachment]

Anyway if any of this is of any interest to anyone let me know

Paul
Attachment
Attachment
Attachment
Attachment
Please log in or create an account to join the conversation.
Mon, Jul 17, 2017 3:25 AM
mrsmackpaul
Topic Author
Offline
Send a private message to mrsmackpaul
Posts: 1,456
Thank you received: 0
DDPCU has gone

with out sounding melodramtic what doesnt go will go to scrap in the next day or so it aint a threat or any drama just saying like it like it is

The only thing I wont chuck in the scrap is the front PCU as they are pretty rare out here the rest is for the bin other wise
There is also some Cat sheaves off a D6 if anyone needs them

Paul
Please log in or create an account to join the conversation.
Tue, Jul 18, 2017 6:09 AM
Andrew
Offline
Send a private message to Andrew
Posts: 886
Thank you received: 0
Reply to mrsmackpaul:
DDPCU has gone

with out sounding melodramtic what doesnt go will go to scrap in the next day or so it aint a threat or any drama just saying like it like it is

The only thing I wont chuck in the scrap is the front PCU as they are pretty rare out here the rest is for the bin other wise
There is also some Cat sheaves off a D6 if anyone needs them

Paul
Some better quality photos would be good Paul.
Time to lift your game a bit here I think.!!!!
Please log in or create an account to join the conversation.
Tue, Jul 18, 2017 9:41 AM
Mike Meyer
Offline
Member
Send a private message to Mike Meyer
Posts: 3,324
Thank you received: 1
Reply to Andrew:
Some better quality photos would be good Paul.
Time to lift your game a bit here I think.!!!!
[quote="Andrew"]Some better quality photos would be good Paul.
Time to lift your game a bit here I think.!!!![/quote]

I reckon Paul must have been hitting the overproof rum before taking the photo's Andrew, there's a lot of stress being a cane farmer this time of the year when the harvest is on and the mung beans are driving like idiots on the back roads..
Please log in or create an account to join the conversation.
Tue, Jul 18, 2017 9:53 AM
Andrew
Offline
Send a private message to Andrew
Posts: 886
Thank you received: 0
Reply to Mike Meyer:
[quote="Andrew"]Some better quality photos would be good Paul.
Time to lift your game a bit here I think.!!!![/quote]

I reckon Paul must have been hitting the overproof rum before taking the photo's Andrew, there's a lot of stress being a cane farmer this time of the year when the harvest is on and the mung beans are driving like idiots on the back roads..
Yeah Mike.
I hear he is hitting the Kero cow and will be down your way tonight.
Hope he put his socks on under his thongs.
Please log in or create an account to join the conversation.
Tue, Jul 18, 2017 3:05 PM
Mike Meyer
Offline
Member
Send a private message to Mike Meyer
Posts: 3,324
Thank you received: 1
Reply to Andrew:
Yeah Mike.
I hear he is hitting the Kero cow and will be down your way tonight.
Hope he put his socks on under his thongs.
[quote="Andrew"]Yeah Mike.
I hear he is hitting the Kero cow and will be down your way tonight.
Hope he put his socks on under his thongs.[/quote]

Is he coming back to his old home town in Mexico Andrew, if so he will need 2 pairs of socks with those Japanese riding boots, it has been miserable here the past 5 or 6 weeks.
Please log in or create an account to join the conversation.
Wed, Jul 19, 2017 1:02 AM
Andrew
Offline
Send a private message to Andrew
Posts: 886
Thank you received: 0
Reply to Mike Meyer:
[quote="Andrew"]Yeah Mike.
I hear he is hitting the Kero cow and will be down your way tonight.
Hope he put his socks on under his thongs.[/quote]

Is he coming back to his old home town in Mexico Andrew, if so he will need 2 pairs of socks with those Japanese riding boots, it has been miserable here the past 5 or 6 weeks.
Mike .
If you see a bloke wandering around down there wearing shorts and a singlet and two pairs of socks with his thongs .
Looking like he would rather be some were else that will be Paul.
Please log in or create an account to join the conversation.
Wed, Jul 19, 2017 10:03 AM
mrsmackpaul
Topic Author
Offline
Send a private message to mrsmackpaul
Posts: 1,456
Thank you received: 0
Reply to Mike Meyer:
[quote="Andrew"]Some better quality photos would be good Paul.
Time to lift your game a bit here I think.!!!![/quote]

I reckon Paul must have been hitting the overproof rum before taking the photo's Andrew, there's a lot of stress being a cane farmer this time of the year when the harvest is on and the mung beans are driving like idiots on the back roads..


Last time I hit the OP rum was whenI was 17 and I woke with young lass at King Cross
Never doing that again

I can grab some fresh pics in the morning
I'm sitting Tulla and about to catch the kero kite back to a place that dosent get cold
Please log in or create an account to join the conversation.
Wed, Jul 19, 2017 12:31 PM
Mike Meyer
Offline
Member
Send a private message to Mike Meyer
Posts: 3,324
Thank you received: 1
Reply to mrsmackpaul:


Last time I hit the OP rum was whenI was 17 and I woke with young lass at King Cross
Never doing that again

I can grab some fresh pics in the morning
I'm sitting Tulla and about to catch the kero kite back to a place that dosent get cold
Come back in 5 months time Paul, you know that's the time to be down here in Mexico when it's 80 in the shade and the humidity is only 30% compared to your 105%!:madgrin: Drinking OP in Kings Cross when your 17 is never going to end well....
Please log in or create an account to join the conversation.
Thu, Jul 20, 2017 2:54 AM
Wombat
Offline
Member
Donor
Send a private message to Wombat
Posts: 1,006
Thank you received: 0
Reply to Mike Meyer:
Come back in 5 months time Paul, you know that's the time to be down here in Mexico when it's 80 in the shade and the humidity is only 30% compared to your 105%!:madgrin: Drinking OP in Kings Cross when your 17 is never going to end well....
Many a man at Kings Cross has put his beer goggles on and met a woman of his dreams at night, only to wake in the morning with a different one beside him. OP shades are a bit stronger than beer goggles, so can see Paul would have been lucky to get away with waking to what he did.

Paul, if you have a FMPCU for a D8, I would be interested, unfortunately I think the D7 FMPCU's are a bit smaller.

What are you planning on doing now in your retirement?

Regards, The Mad mouth From The South
Please log in or create an account to join the conversation.
Thu, Jul 20, 2017 4:47 AM
mrsmackpaul
Topic Author
Offline
Send a private message to mrsmackpaul
Posts: 1,456
Thank you received: 0
Reply to Wombat:
Many a man at Kings Cross has put his beer goggles on and met a woman of his dreams at night, only to wake in the morning with a different one beside him. OP shades are a bit stronger than beer goggles, so can see Paul would have been lucky to get away with waking to what he did.

Paul, if you have a FMPCU for a D8, I would be interested, unfortunately I think the D7 FMPCU's are a bit smaller.

What are you planning on doing now in your retirement?

Regards, The Mad mouth From The South
Ok some more photo's of some sheaves and the blocks for KelOZ

[attachment=43576]IMG_3933.jpg[/attachment]
[attachment=43577]IMG_3938.jpg[/attachment]
[attachment=43578]IMG_3939.jpg[/attachment]
[attachment=43579]IMG_3940.jpg[/attachment]
[attachment=43580]IMG_3941.jpg[/attachment]
[attachment=43581]IMG_3942.jpg[/attachment]

Wombat I dunno about the front PCU but heres some close up numbers off the castings Old Magnet maybe be able to help with some more details there

[attachment=43576]IMG_3933.jpg[/attachment]
[attachment=43582]IMG_3935.jpg[/attachment]
[attachment=43583]IMG_3936.jpg[/attachment]
[attachment=43584]IMG_3937.jpg[/attachment]

None of the sheaves are rifled at all I think there is some more Cat ones laying about but I havent seen them as yet

Wombat no plans yet for the near future but than to spend some time with some family and I would like to go to NZ for a look and Canada as well if time permits

The Princess is keen to shift back to Gippsland but I dont share her keenness

Paul
Attachment
Attachment
Attachment
Attachment
Attachment
Attachment
Attachment
Attachment
Attachment
Please log in or create an account to join the conversation.
Thu, Jul 20, 2017 5:44 AM
Showing 1 to 10 of 11 results
1
YouTube Video Placeholder

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.

Upcoming Events

Wheatlands Warracknabeal Easter Rally

Chapter Nineteen

| 34 Henty Hwy, Warracknabeal

Veerkamp Open House 2025

Chapter Fifteen

| Placerville, CA

Stradsett Park Vintage Rally

Chapter Two

| Stradsett, Nr Downham Market. Norfolk PE33 9HA UK
View Calendar
ACMOC

Antique Caterpillar
Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

[email protected]

Terms & Privacy
Website developed by AdCo

Testimonials

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N

Join Today!