Misc D2 and D4 parts for sale

You can email me at [email protected]

BETTER TO EMAIL ME BECAUSE I AM NOT GOOD AT CHECKING ACMOC DAILY. SORRY.

Also, dealing with shipping of large stuff is just too much trouble. So, anything that would need to be on a pallet is local pickup only. Sorry, but I'm not setup to ship large parts.

D2 transfer pump Bypass spring - $18 + USPS shipping.
[attachment=46324]BypassSpring1.jpg[/attachment][attachment=46325]BypassSpring2.jpg[/attachment]

D2 front Idler Bushings 1F 2684- set of 4 - $100 + shipping
These are new. Measure 1 3/4" I.D. and 2 1/8" O.D.
I had bought several and changed some in one machine, but these are extra.
Took a saw-all and cut the old bushing through, pressed it out and pressed in the new.
[attachment=46326]IdlerBushing.jpg[/attachment][attachment=46327]IdlerBushing2.jpg[/attachment]

Hyster winch brake lever mount. Bolts to side of seat and holds the brake lever. - $50 + shipping
[attachment=46328]WinchLeverMount2.jpg[/attachment][attachment=46329]WinchLeverMount3.jpg[/attachment][attachment=46330]WinchLeverMount1.jpg[/attachment]

D2 - D4 Pony pipe - $35 + shipping
[attachment=46305]PonyPipe.jpg[/attachment]

RD4 seat - side tank model - has dealer plate and serial number plate - $75 + shipping
[attachment=46306]RD4_Seat.jpg[/attachment]

RD4 Hood - $75 + shipping
[attachment=46307]RD4Hood.jpg[/attachment]

RD4 Dash with Pony breather- $50 + shipping
[attachment=46308]RD4-Dash.jpg[/attachment] [attachment=46318]PonyBreather1.jpg[/attachment] [attachment=46319]PonyBreather2.jpg[/attachment]

D2 radiator mount - $40 plus shipping (was a pita to remove)
[attachment=46309]RadiatorMount.jpg[/attachment]

D2 Hood. Not as nice as the other, but a hood that could be restored. $50 + shipping
[attachment=46323]D2Hood1.jpg[/attachment]

D25U hood - $100 + shipping SOLD to someone local.
[attachment=46310]D25U_Hood.jpg[/attachment]

Brake drums (4 total) - $75 each + shipping
[attachment=46311]BrakeDrums.jpg[/attachment]

RD4 Fender -Right side - $75 + shipping
[attachment=46315]RD4_Fender1.jpg[/attachment][attachment=46316]RD4_Fender2.jpg[/attachment][attachment=46317]RD4_Fender3.jpg[/attachment]

Exhaust Manifolds (various D2) - $60 each + shipping
[attachment=46313]ExhaustManfolds.jpg[/attachment] [attachment=46314]ExhaustManfolds2.jpg[/attachment]

RD4 Pony gas tank with cap - $50 + shipping
[attachment=46320]RD4PonyGasTank.jpg[/attachment]

Pony Intake - For J series or RD4. Has water seal between diesel head and pony intake. - $75 + Shipping
[attachment=46321]PonyIntakeRD4.jpg[/attachment] [attachment=46322]PonyIntakeRd42.jpg[/attachment]

do you have the inner drum that the steering clutch plates ride on

You mean if you take apart a steering clutch pack, the inner part of the clutch pack?
I have one complete steering clutch. Assembled. Is a good spare I was saving but don't see me using.

Can you get me another picture or 2 of the fender and lever assembly?
Also shipping to 76543 ?
Thank You, Roby Whitehead

Just sent you an email.

Mike, I have a inner and outer drum that has some grooves worn in it. I don't have a picture of the inner drum but I could get one if you want. Make me an offer

please send a picture

I will get out to the farm in a day or two and get you a picture
Chuck C

[quote="Texasbest"]Can you get me another picture or 2 of the fender and lever assembly?
Also shipping to 76543 ?
Thank You, Roby Whitehead

Just sent you an email.[/quote]

Roby, I apologize. I had posted an older picture of the fender. The lever is not on the fender. A local guy got that. The lever was for a La Plant Choate dozer, definitely not for Traxson. I updated the fender photos. I sent you an email. Thanks.
Leslie

I have a D2 5U and am looking for an equalizer spring. Might you have one of those?

No spring, sorry.

Do you have any bottom roller end caps that bolt to the track frame for a 5J series D-2.