Rd4 Emgine Fuel Strainer

They org had the strainer type like your book shows but there was a field change over the the system you have now the yarn spools can be gottin at any Cat Dealer or Napa also makes them you ne 4 Cat. part no. 7B19 and the bleeder nob goes to front on this type

Thanks Willie for the info, I was afraid that some one might have done a swap of some kind off of another piece of equipment and that I was going to have to figure out what they did and try to run down odd-ball parts. This info makes life a lot easer. Thanks again for the good info. Lou Ray

I went to NAPA yesterday to try and get these fuel filters. NAPA does not recognize part number 7B19 as a good part number. We even tried to cross referance the old part numbers, no help. I will try caterpillar Monday. The last time I dealt with them because of the age of my caterpillar, they where not to helpful till "I" came up with the part number, then they would go to the computer and check to see if they had it. Does anyone have a sugestion of where else I might try to find these filters?

The 7B19 was the old filter change kit with gaskets and four elements.
The parts manuals don't list a number for individual filters. There have also been a couple of evolutions in the numbers and they are now the sock type Wix #33164 or NAPA #3164. You would still need to get the gaskets (2) 5B9733 and 5B9831 from Cat.