Old Magnet links to, Direct Start D2 , how to pictures and templates

Hi folks,
I was having some issues with my d2 again. pony motor.
wanted to re-evaluate the work, and skinned knuckles, on Old Magnets information on d2 conversion to direct start.

Cant hook up to the link, sends me to image shack. I signed in and nothing there.
is there another link ? I don't see any pictures here anymore on this web site. maybe moved ?
image shack appears to be for myself uploading pic's to it, but cant see anyone else's.

spring time again, and this is what I get for letting the dozer sit uncovered for that last year + or so in a couple feet of snow & Rain,
pipes were covered, did start and run for a bit, now nothing.

so time to re-think direct electric conversion again. 😊
can someone direct me ? did a search on the web to, couldn't find anything.
thx
s

Try here.... info is still good for the D2 conversion. Sources for parts have changed. Come back when you are ready.
http://sites.google.com/site/oldmagcat/

Ok thx.
I did get it printed a big thank you.

The other question is, has anyone done this without pulling the engine.
doing it on the tractor as it sits, with a nice hole saw or hole hog, plunging main hole ?


thanks much
s

[quote="Old Magnet"]Try here.... info is still good for the D2 conversion. Sources for parts have changed. Come back when you are ready.
http://sites.google.com/site/oldmagcat/[/quote]

Sounds like a good job for a moderator , to update the link information .

Scott in WA, I have done the procedure without tractor disassembly - as have others. You can search through my posts and see specifically which tools I used to accomplish this. Others here scoffed at my methods but you can decide on what suits you.