If some one will bring a D-9 or Two, I'll get a Cat 660 54cyd scraper to the show for a working Demo. Any Takers? D4E needs to put his new 9 axle set up to work. LOL
Last Call Gang,
Any takers on getting a D-9 to Tulare Dig. I would like to get the Cat 660 there, but without a push cat, not much sense. Any body want to step up to the plate a get some pushing done.-glen
D7+D2=D9
Daron
Daron,
I'll bring my D-2 if I can get the pony to run in the meantime.
Soapy-
Pete's RD7 should also be there. That should result in a D9!
Daron
(P. S. Sometime over the weekend please brief me on the best starting procedure for a JD BR. Thanks)
Pops, I left the High Output up at Woodland but I'll have Christine's Jonh Deere B to assist LoL
Soapy, did you get the other D2 or struggling with the one we traded?
Pops, I left the High Output up at Woodland but I'll have Christine's Jonh Deere B to assist LoL
Soapy, did you get the other D2 or struggling with the one we traded?
[quote="Mike Mc"]Pops, I left the High Output up at Woodland but I'll have Christine's Jonh Deere B to assist LoL
Soapy, did you get the other D2 or struggling with the one we traded?[/quote]
Hi oil slick,
I made the trip to them thar hills on Tuesday with the little woman, and we gave it a tug with Glen's fork lift, and she fired right off, and ran real nice. The mag is not sparking, and being it has been raining since, I will tackle it on Saturday, and see if I can get the pony to fire.
Have to do some welding on the blade, before I push any dirt with it. It steers fine, and the hydraulics work well. The hoses aren't to good, and will need replacing in the future.
I will be checking all the fluids on Saturday, after I get the pony to fire off. The pony carb is flooding, so it needs some attention also.
Meanwhile, I had to fire up the one I got from you, to pull it off the tilt bed, (sideways I must add), ( steel bed, and wet) and then later, had to lite it off again to pull the dually out of the mud. That was on Wednesday during the rain storm.
Ed
Hey if we get four D-2's and the Mighty D-4 pushing it will out push an 11, because with my math that's a D-12:grouphug:
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Fifteen
| Placerville, CAChapter Two
| Stradsett, Nr Downham Market. Norfolk PE33 9HA UKChapter Two
| Faulkner Farm, West Drove, Wisbech, Cambridgeshire, PE14 7DP, UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N
