ACMOC
Login
ACMOC
Log-in problem

Log-in problem

Showing 1 to 6 of 6 results
leon
Topic Author
Offline
Send a private message to leon
Posts: 67
Thank you received: 0
No place else to inquire as to why my efforts to connect to other "Cat" forum
no longer effective,nor any inquires to administrator is of any help,any one else with this problem? [site suddenly quit accepting my log-in info][
Please log in or create an account to join the conversation.
Thu, Dec 20, 2007 7:38 AM
SJ
Offline
Send a private message to SJ
Posts: 1,890
Thank you received: 0
It was quite awhile before I could get on the ACME site but finally it went through and then a short while ago it stopped working so I contacted the ACME site and they issued me a new log in pass word which is just numbers & it,s ok now. If you get numbers then file them someplace so if you need them again you,ll have them. This ACMOC site for a couple months has acted up as I have to log in everytime I turn it on & I contacted the site here but hasn,t helped. It,s a pain to have to log in everytime but I have to do it to get on.
Please log in or create an account to join the conversation.
Thu, Dec 20, 2007 7:16 PM
leon
Topic Author
Offline
Send a private message to leon
Posts: 67
Thank you received: 0
Reply to SJ:
It was quite awhile before I could get on the ACME site but finally it went through and then a short while ago it stopped working so I contacted the ACME site and they issued me a new log in pass word which is just numbers & it,s ok now. If you get numbers then file them someplace so if you need them again you,ll have them. This ACMOC site for a couple months has acted up as I have to log in everytime I turn it on & I contacted the site here but hasn,t helped. It,s a pain to have to log in everytime but I have to do it to get on.
Thanks for your reply,the site people has sent me countless and different no's
to no avail,keep asking for the same thing,no help at all,hoping someone
from forum will wake up soon and address the situation.
Please log in or create an account to join the conversation.
Thu, Dec 20, 2007 10:31 PM
Darrol D8H
Offline
Send a private message to Darrol D8H
Posts: 102
Thank you received: 0
Reply to leon:
Thanks for your reply,the site people has sent me countless and different no's
to no avail,keep asking for the same thing,no help at all,hoping someone
from forum will wake up soon and address the situation.
Guys, I have had the same problems, just have to live with them. Darrol
Please log in or create an account to join the conversation.
Fri, Dec 21, 2007 4:43 AM
Painter
Offline
Send a private message to Painter
Posts: 132
Thank you received: 0
Reply to Darrol D8H:
Guys, I have had the same problems, just have to live with them. Darrol
Just send Joe Black a private message on this board. he will respond and help you out. Just some small glitch somewhere.
Hi, My name is Dennis, and I am a Rust-a-holic!

D4 7U17091 D6 8U10305 1926 Cat 30 1955 Ford T800, 74 Ford LT9000 1936 K Allis
Please log in or create an account to join the conversation.
Fri, Dec 21, 2007 4:56 AM
Joe_Black
Offline
Send a private message to Joe_Black
Posts: 97
Thank you received: 0
Reply to Painter:
Just send Joe Black a private message on this board. he will respond and help you out. Just some small glitch somewhere.
Guys I haven't received anything regarding the issues mentioned excepting a PM today from rawlins (reply sent), so feel free to contact me through the "Contact Us" link in the forum so I can address your issues.

SJ, other than what's been suggested previously with your issue I'm at a loss. There's nothing unusual or any strange 3rd-party mods run on either forum, so my best guess is either a patch, update or some new piece of software on your machine would be the likely culprit. I know these kinds of things aren't easy to track down, believe me as that's what I do to make coin day in and day out. I wish I could offer a better answer or just point my finger and say "there's the problem!" but without digging into your machine I'm stabbing in the dark. 😞
Please log in or create an account to join the conversation.
Fri, Dec 21, 2007 9:23 AM
D2farmer
Offline
Send a private message to D2farmer
Posts: 44
Thank you received: 0
Reply to Joe_Black:
Guys I haven't received anything regarding the issues mentioned excepting a PM today from rawlins (reply sent), so feel free to contact me through the "Contact Us" link in the forum so I can address your issues.

SJ, other than what's been suggested previously with your issue I'm at a loss. There's nothing unusual or any strange 3rd-party mods run on either forum, so my best guess is either a patch, update or some new piece of software on your machine would be the likely culprit. I know these kinds of things aren't easy to track down, believe me as that's what I do to make coin day in and day out. I wish I could offer a better answer or just point my finger and say "there's the problem!" but without digging into your machine I'm stabbing in the dark. 😞
I like the rest of you have had the same log in problem. As Joe stated it could be a software problem, mine was. I had download a program from Zone Alarm called ForceField. The program worked so good that it caused the problem. Once I killed that program I only had to log in once and now it remembers my ID. 😄
Please log in or create an account to join the conversation.
Wed, Dec 26, 2007 8:03 PM
Showing 1 to 6 of 6 results
YouTube Video Placeholder

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.

Upcoming Events

Veerkamp Open House 2025

Chapter Fifteen

| Placerville, CA

Stradsett Park Vintage Rally

Chapter Two

| Stradsett, Nr Downham Market. Norfolk PE33 9HA UK

Chapter 2 The Link Club's AGM

Chapter Two

| Faulkner Farm, West Drove, Wisbech, Cambridgeshire, PE14 7DP, UK
View Calendar
ACMOC

Antique Caterpillar
Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

[email protected]

Terms & Privacy
Website developed by AdCo

Testimonials

"I became a member recently because the wealth of knowledge here is priceless." 
-Chris R

Join Today!