D5 Dozer brake problem

Showing 1 to 2 of 2 results

Rep0144

Topic Author

Offline

Send a private message to Rep0144

Posts: 29

Thank you received: 0

I have a D5 94J that I need to rebuild brakes on. Can the brake bands be taken out without removing inner parts and do the bands (that are made up 3 pieces bolted together), need to be separated to get them out. My service manual doesn't show removal except for lifting out complete with inner drum to change clutches.
Any help would be appreciated.
Russell

Please log in or create an account to join the conversation.

Sun, Jan 20, 2013 5:24 AM

Old Magnet

Offline

Send a private message to Old Magnet

Posts: 16,694

Thank you received: 16

Usual procedure is to break down into three sections and roll them out. Don't forget to back off the support screw underneath the tractor.

Please log in or create an account to join the conversation.

Mon, Jan 21, 2013 4:15 AM

Rep0144

Topic Author

Offline

Send a private message to Rep0144

Posts: 29

Thank you received: 0

Reply to Old Magnet:

Usual procedure is to break down into three sections and roll them out. Don't forget to back off the support screw underneath the tractor.

Thanks, I was hoping that it could be accomplished that way.It probably will be fun to get everything cleaned up good with the pieces of the lining that peeled loose and are laying at the bottom of housing, but should be able to get it done.
Russell

Please log in or create an account to join the conversation.

Mon, Jan 21, 2013 9:18 AM

Showing 1 to 2 of 2 results

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.