D4 7U 315 injection pump lifter setting

Showing 1 to 4 of 4 results

Suomalainen

Topic Author

Offline

Send a private message to Suomalainen

Posts: 31

Thank you received: 0

Would any one know what the injection pump lifter setting is on a D4 7U 315 engine? There was a previous discussion on a RD4 as being 1.734 but expect it might be different on the 7U series.

Please log in or create an account to join the conversation.

Tue, Nov 27, 2007 9:36 AM

Old Magnet

Offline

Send a private message to Old Magnet

Posts: 16,695

Thank you received: 17

Not much different😊 😊 Specs show1.736 in. for the 6U/7U.

Please log in or create an account to join the conversation.

Tue, Nov 27, 2007 10:04 AM

Suomalainen

Topic Author

Offline

Send a private message to Suomalainen

Posts: 31

Thank you received: 0

Reply to Old Magnet:

Not much different😊 😊 Specs show1.736 in. for the 6U/7U.

Thank you Old Magnet for the 7U injection pump spec's. It is sure good to have you around.

Please log in or create an account to join the conversation.

Tue, Nov 27, 2007 12:03 PM

Offline

Send a private message to SJ

Posts: 1,890

Thank you received: 0

Reply to Suomalainen:

Thank you Old Magnet for the 7U injection pump spec's. It is sure good to have you around.

The .001 or .002 less won,t hurt anything & I usually set them at 1.735 & it would account for a little wear on the bottom of the pump plunger or even the screw surface.

Please log in or create an account to join the conversation.

Tue, Nov 27, 2007 7:23 PM

Suomalainen

Topic Author

Offline

Send a private message to Suomalainen

Posts: 31

Thank you received: 0

Reply to SJ:

The .001 or .002 less won,t hurt anything & I usually set them at 1.735 & it would account for a little wear on the bottom of the pump plunger or even the screw surface.

And thank you also Senior Member your advice is much appreciated.

Please log in or create an account to join the conversation.

Wed, Nov 28, 2007 3:28 AM

Showing 1 to 4 of 4 results

Upcoming Events