I have a fuel issue with the pony. At first the valve would not let gas through. I messed with it and restored the flow. After starting, the valve would not stop the flow. I got the pony stopped but I knew there was going to be a issue with gas in the oil. Some time later I opened the crank case drain and sure enough...gas. I drained it out, added a little oil, cranked it over and then drained that out. This time I didn't smell any gas. Two questions 1-Do I need to rinse it further and 2-can I get a new valve assembly?
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Fifteen
| Placerville, CAChapter Two
| Stradsett, Nr Downham Market. Norfolk PE33 9HA UKChapter Two
| Faulkner Farm, West Drove, Wisbech, Cambridgeshire, PE14 7DP, UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I became a member recently because the wealth of knowledge here is priceless."
-Chris R