Cat d6 9u steering clutch bolts torque

mikewood869

Topic Author

Offline

Send a private message to mikewood869

Posts: 45

Thank you received: 0

Does anyone know what the bolt are torqued to on the bolts from the final drive and from the steering clutch to the rear end on a cat d6 9u or is it just feel tight?

Please log in or create an account to join the conversation.

Mon, Mar 7, 2022 10:54 PM

Rome K/G

Offline

Send a private message to Rome K/G

Posts: 6,092

Thank you received: 0

Standard grade 8 bolt torque.

Please log in or create an account to join the conversation.

Mon, Mar 7, 2022 11:22 PM

mikewood869

Topic Author

Offline

Send a private message to mikewood869

Posts: 45

Thank you received: 0

100 foot pounds?

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 1:20 AM

Rome K/G

Offline

Send a private message to Rome K/G

Posts: 6,092

Thank you received: 0

Reply to mikewood869:

100 foot pounds?

3/8" bolts 32+- ft lbs
1/2" bolts 75+-10 ft lbs
5/8" bolts 150+-20 ft lbs

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 2:10 AM

bruce oz

Offline

Member

Send a private message to bruce oz

Posts: 1,408

Thank you received: 5

[attachment=67104]Capture.JPG[/attachment]

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 3:31 AM

Rome K/G

Offline

Send a private message to Rome K/G

Posts: 6,092

Thank you received: 0

Reply to bruce oz:

[attachment=67104]Capture.JPG[/attachment]

Pinion flange to steering clutch drum bolt torque?
Pinion bearing cage to case bolt torque?
Pinion to flange tons press fit?
Bull gear to to hub bolt torque?
Dead shaft nut torque?
Bearing/seal preload nut tightness?

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 4:49 AM

bernie

Offline

Member

Send a private message to bernie

Posts: 710

Thank you received: 0

fastenal.

[attachment=67107]Torque-Tension Chart for A307 Gr5 Gr8 Gr9.pdf[/attachment]

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 6:36 AM

mikewood869

Topic Author

Offline

Send a private message to mikewood869

Posts: 45

Thank you received: 0

Reply to bernie:

fastenal.

[attachment=67107]Torque-Tension Chart for A307 Gr5 Gr8 Gr9.pdf[/attachment]

I believe its the drum side and gear that have bolts that go in. The diagram that I'm looking at is on pg. 114. The article is D6 TRACTOR 9U13263-29764 FORM UE0032595 ue032595.

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 8:56 AM

bruce oz

Offline

Member

Send a private message to bruce oz

Posts: 1,408

Thank you received: 5

[attachment=67108]Capture.JPG[/attachment]

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 9:34 AM

Rome K/G

Offline

Send a private message to Rome K/G

Posts: 6,092

Thank you received: 0

Reply to bruce oz:

[attachment=67108]Capture.JPG[/attachment]

For 6B5063 bolts use the fine thread bolt torque then turn more if needed to bend the locks properly.

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 10:07 AM

kittyman1

Offline

Send a private message to kittyman1

Posts: 577

Thank you received: 0

Reply to Rome K/G:

For 6B5063 bolts use the fine thread bolt torque then turn more if needed to bend the locks properly.

-do you have a thread diameter?
- if it's 5/8" F, should be 18 threads per inch, Grade 8 is 180 pounds minimum lubed threads...
-so 150 plus the additional turn to bend locks sounds very close (as per Rome)

Please log in or create an account to join the conversation.

Tue, Mar 8, 2022 11:30 AM

Cat d6 9u steering clutch bolts torque

Follow Us on Social Media

Upcoming Events

61st Annual International Watch Fob Association Show & Sale April 25 & 26, 2025 Lakeside Sand & Gravel Open House & Antique Equipment Show April 26, 2025

Veerkamp Open House 2025

Stradsett Park Vintage Rally

Chapter 2 The Link Club's AGM

Testimonials