ACMOC
Login
ACMOC
70J 997L what is it?

70J 997L what is it?

Showing 1 to 10 of 13 results
1
BobPV15
Topic Author
Offline
Member
Send a private message to BobPV15
Posts: 100
Thank you received: 0
I am looking at a 977L from 1975, serial number is around 70J1900, is said to be in good shape, will see on Saturday.
The parts book for 70J1 to 70J2222 is printed in Japan. The service manual covers 11K 48J and 70J machines.
My Cat performance manual edition 10 list the 977L with 3 speeds forward and reverse, said nothing about a torque converter.
This machine has the 3 speeds forward and reverse but has a torque converter as well. Any comments on these machines.
I am on high ground, mostly gravel and no swamp.
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 7:21 AM
Rome K/G
Offline
Send a private message to Rome K/G
Posts: 6,092
Thank you received: 0
That would be called a Track Type Loader.
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 7:29 AM
Old Magnet
Offline
Send a private message to Old Magnet
Posts: 16,694
Thank you received: 16
Reply to Rome K/G:
That would be called a Track Type Loader.
The 70J "L" model is a Japanese built machine with 3306 (44V) engine. 190hp sleeve metering fuel system. A heavy weight at 48,500 lbs.
Built from 1968 to 1978 with 3705 units total. The "K" model became "L" model at s/n 1303.
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 8:05 AM
BobPV15
Topic Author
Offline
Member
Send a private message to BobPV15
Posts: 100
Thank you received: 0
Reply to Old Magnet:
The 70J "L" model is a Japanese built machine with 3306 (44V) engine. 190hp sleeve metering fuel system. A heavy weight at 48,500 lbs.
Built from 1968 to 1978 with 3705 units total. The "K" model became "L" model at s/n 1303.
Thanks Old Magnet

Is it unusual to see Japanese machines in North America? Did other north American machines have the torque converter?
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 8:10 AM
Old Magnet
Offline
Send a private message to Old Magnet
Posts: 16,694
Thank you received: 16
Reply to BobPV15:
Thanks Old Magnet

Is it unusual to see Japanese machines in North America? Did other north American machines have the torque converter?
Power shift (torque converter) is standard. Comparable to the late 11K and 14X USA models.
Lots of Cat models built in Japan in North America. In some model cases that is the main source.
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 8:16 AM
BobPV15
Topic Author
Offline
Member
Send a private message to BobPV15
Posts: 100
Thank you received: 0
Reply to Old Magnet:
Power shift (torque converter) is standard. Comparable to the late 11K and 14X USA models.
Lots of Cat models built in Japan in North America. In some model cases that is the main source.
That is good to hear, thought it might be an odd ball as the parts guy at my local Finning branch told me that the 70J was not a valid serial number for a 977.
I know track loaders are not that popular these days as most people think you have to do everything with an excavator. What I am doing is making flat areas
along the side of a mountain. I dig into the high side and dump on the low and end up making a flat area about 150 to 200 ft wide and 500 ft long then go up the hill and do it again.
The old 225 works great for the first pass along the hill, but as you get wider you have to move the material two or three times and production drops off fast. So I thing the 977 would work good after the first pass with the 225 when there is some room to move. It will dig most of the material and move it to the edge in one go.
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 9:13 AM
Old Magnet
Offline
Send a private message to Old Magnet
Posts: 16,694
Thank you received: 16
Reply to BobPV15:
That is good to hear, thought it might be an odd ball as the parts guy at my local Finning branch told me that the 70J was not a valid serial number for a 977.
I know track loaders are not that popular these days as most people think you have to do everything with an excavator. What I am doing is making flat areas
along the side of a mountain. I dig into the high side and dump on the low and end up making a flat area about 150 to 200 ft wide and 500 ft long then go up the hill and do it again.
The old 225 works great for the first pass along the hill, but as you get wider you have to move the material two or three times and production drops off fast. So I thing the 977 would work good after the first pass with the 225 when there is some room to move. It will dig most of the material and move it to the edge in one go.
I'm curious as to what the terracing is for?
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 9:17 AM
BobPV15
Topic Author
Offline
Member
Send a private message to BobPV15
Posts: 100
Thank you received: 0
Reply to Old Magnet:
I'm curious as to what the terracing is for?
The lower level has house garage shop and a shed for some restored tractor. The upper level will be for storage of parts and parts machines so they are out of sight.
You know how it is with old iron, one piece attracts another and another etc and soon you need more space!
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 10:59 AM
mrsmackpaul
Offline
Send a private message to mrsmackpaul
Posts: 1,456
Thank you received: 0
Reply to BobPV15:
The lower level has house garage shop and a shed for some restored tractor. The upper level will be for storage of parts and parts machines so they are out of sight.
You know how it is with old iron, one piece attracts another and another etc and soon you need more space!
yeah mate these old pieces of gear sought of bread when your not looking 😆 I went to a place a while ago and realised I dont have a problem at all compared to some or at least thats what I told my wife :noidea:

Paul
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 3:52 PM
Old Magnet
Offline
Send a private message to Old Magnet
Posts: 16,694
Thank you received: 16
Reply to mrsmackpaul:
yeah mate these old pieces of gear sought of bread when your not looking 😆 I went to a place a while ago and realised I dont have a problem at all compared to some or at least thats what I told my wife :noidea:

Paul
Thanks for the explanation. Though maybe you were working up a housing development or similar, not just private use. That's about as bad as me buying a backhoe years ago to plant some rose bushes for the wife....
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 10:20 PM
old-iron-habit
Offline
Member
Send a private message to old-iron-habit
Posts: 3,520
Thank you received: 0
Reply to Old Magnet:
Thanks for the explanation. Though maybe you were working up a housing development or similar, not just private use. That's about as bad as me buying a backhoe years ago to plant some rose bushes for the wife....


Sounds completely logical to me. How did you backfill them without buying another crawler?
Please log in or create an account to join the conversation.
Fri, Sep 12, 2014 10:36 PM
Showing 1 to 10 of 13 results
1
YouTube Video Placeholder

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.

Upcoming Events

Wheatlands Warracknabeal Easter Rally

Chapter Nineteen

| 34 Henty Hwy, Warracknabeal

Veerkamp Open House 2025

Chapter Fifteen

| Placerville, CA

Stradsett Park Vintage Rally

Chapter Two

| Stradsett, Nr Downham Market. Norfolk PE33 9HA UK
View Calendar
ACMOC

Antique Caterpillar
Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

[email protected]

Terms & Privacy
Website developed by AdCo

Testimonials

"I became a member recently because the wealth of knowledge here is priceless." 
-Chris R

Join Today!