Wanted: Model 44 Hydraulic Vane Pump Parts

[quote="conmanklh"]Looking for parts for a Model 44 hydraulic system, one valve, 37 GPM @ 1400 rpm to fit a D4 Caterpillar tractor. The vane pump is worn out, need the vanes and the cam ring to make the system work again.

If anyone has some parts or info please email or call Ken at 780 539 3989.[/quote]

I have a complete model 44 2 valve that I am pullling off a 1960 d7d farm tractor.
Should be in good condition. Dozer has less than 3800 hours on it.
Hope someone can use it.

Clay
Livingston, Mt

[quote="clay bowden"]I have a complete model 44 2 valve that I am pullling off a 1960 d7d farm tractor.
Should be in good condition. Dozer has less than 3800 hours on it.
Hope someone can use it.

Clay
Livingston, Mt[/quote]

Clay,

I would be interested in learning more about your Dozer 44 hydraulic control unit. I have a Cat D8E (14A) that may be able to use this hydraulics set-up. Please connect with me by e-mail or my tel.'s
310-717-0213, 530-474-5963, through this blog or [email protected].

Also, give me some idea about how complete this HCC is and what you want for it.

Your response would be appreciated.

George

I will call with the serial # later.

Clay

George

CAT
8W5868
Model 445
Valves 2
29 GPM @ 1600 rpm

Information stamped on id plate on pump

I am waiting on a back ordered O ring to install the tow winch on the D7
Once the unit is removed I can send measurements and pictures.
The unit has a adapter that fits between the unit and the tractor.
The adapter may be different to fit other machines.

Clay