I should have the startor housing 6b9158 but no startor now
I have heard that a starter for a H Farmall will fit the 2U pony starter housing. I looked at mine here and it looks similar walking 50 ft. between them but have not physically tried it. They have the same looking engagement lever also.
I have heard that a starter for a H Farmall will fit the 2U pony starter housing. I looked at mine here and it looks similar walking 50 ft. between them but have not physically tried it. They have the same looking engagement lever also.
If it helps, I happen to know than an H farmall (and practically all other gas farmalls) have a 10 tooth pinion and rotates CCW (looking at the pinion end). The starter on my D7 17A pony has a 9 tooth pinion but also rotates CCW. I have no idea what's on a D8.
If remember my H FARMALL startor had 2 bolts for bolting on housing and the old D8 startor need just a big bolt to lock on housing
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Thirty
| 3429 Copper Coast Highway Paskeville, SA 5572Chapter Nineteen
| Victoria Park, Urana NSWChapter Nineteen
| 1234 Carngham-Lake Goldsmith Rd, Lake Goldsmith VicChapter Nineteen
| 2 Winkleigh Rd, Exeter TAS 7275
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N