Pony tank reseal...

Hey Gang.

Delurking for a bit here 😛 I finally got around to re-sealing the pony motor tank on my 112 😮 (my budget got hit hard over the summer...so the poor thing just sat 😞 ) I used Northern Fuel Tank Sealer from Summit racing. I had already de-rusted the tank (that's when I found the pin holes). Poured it in, gently sloshed it around and drained the excess. Now it's drying. 24 hours I'll know if it doesn't leak anymore!

[img]http://pic70.picturetrail.com/VOL1789/7783792/19785120/342580903.jpg[/img]
[img]http://pic70.picturetrail.com/VOL1789/7783792/19785120/342580915.jpg[/img]
[img]http://pic70.picturetrail.com/VOL1789/7783792/19785120/342580932.jpg[/img]
[img]http://pic70.picturetrail.com/VOL1789/7783792/19785120/342580960.jpg[/img]

Next job is installing the exhaust manifold for the pony now that the gaskets are here (thanks Olsons Gaskets!)