Part numbers identification

Post the part numbers here (ideally with a photo of the part) and the crew will identify them
Cheers,
Neil.

[quote="Neil"]Post the part numbers here (ideally with a photo of the part) and the crew will identify them
Cheers,
Neil.[/quote]

Thanks. I will do some of them later today. (I did post some photos of intake and exhaust valves in the for sale section). Thanks.

Here are a few to get started: Thanks!
[attachment=17866]2P1725.jpg[/attachment][attachment=17867]5p4784.jpg[/attachment][attachment=17868]5p6188.jpg[/attachment][attachment=17869]5S6297.jpg[/attachment][attachment=17870]9L503.jpg[/attachment][attachment=17871]9S8041.jpg[/attachment]

2P1725 shaft is water pump shaft for D8H SN27729-up
5H4784 lever is one of 4 levers used in D9 tractor and 583 pipelayer in arrangement 3L-1584 torque converters
5P6188 sleeve is not in SIS (some tractors and equipment are not in there)
5S6297 seal is a crankshaft seal for a D330C engine used in many applications NOTE: this item says in the system "with seal for worn flange". It doesn't give the part number of the sleeve. I would feel sure that's where the 5P6188 sleeve goes in the mix.
9L503 impeller is for a 1673 truck engine on a 9L-2279 water pump assembly
9S8041 impeller is an impeller used in many applications: D7F military tractor, 941 track loader, 930 wheel loader, 966 wheel loader, 627 scrapers, 815 compactor, 950 wheel loader, and I'm tired of typing...there's about 30 more applications with lots of different engines.

Thank you very much. That is a great start in ID'ing these items. I also have some valves listed in the for sale section that were labeled "318 valves", however, there are too many different ones for them all to be for a 318. I have listed the part numbers there also that are imbossed on the flat of the valve heads. I have quite a few more parts I will put up later. I have a box of parts that are labeled for a "D7 Turbo" too. Thanks again. keith

I have so much of this stuff I am afraid I will over use my welcome. But anyway, here are a few more:
1. 7M9908 Sleeve
2. 7M9922 Bearing
--------------------------------------------------
I took a photo of one of the following, (Items 3,4 and 5, they physically look the same)
3. 7S1059 CAT. G
4. 7S8722 CAT. A9
5. 7N5005 CAT. F1
[attachment=17956]cat part 3c.jpg[/attachment]
---------------------------------------------------
6. 3N0584 Made by Delco,
[attachment=17957]cat part 3a.jpg[/attachment]
--------------------------------------------------
7. 6L2673 impeller
-----------------------------------------
8. Unknown Part number for this seal: 4 5/8" OD, about 3 1/2" ID.
[attachment=17958]cat part 3b.jpg[/attachment]

Thanks!

7M9908 Sleeve-flinger; Used in turbo for lots of different engines, gas and diesel
7M992 Bearing; Ditto above
7S1059 Fuel nozzle(capsule type injector); D342, D343,D346,D349,D353,D379,D398
7S8722 Fuel nozzle ; D330C and 1673C truck engine
7N5005 Fuel nozzle ; D346, D348, D349
3N0584 Shut off solenoid ; Lots of applications
6L2673 Impeller; D320, D330, and D333 engines

Thanks again! Am I right thinking the impellers listed so far are for water pumps?

Here are more:
7B2174, seal. One is a Cat. part and the others say CHICAGO ALLIS, same p/n.
5S6622, Seal.
DR-1481, looks like a starter solenoid?
3S6638, nozzle.
2S3966, nozzle?
6N9373, Pump seal D7E, water pump?
3K1650 24V switch, Heat and start?
6H3491, Seal assy, rubber load spring?
6H3347, (6F160 nozzle)
4F4769, Seal assy, carbon in steel?
1H2831, Rod bearing, .030, D4 Start engine
AC Fuel pump and sediment bowl, Model B, 855228
300 5652274, switch
6B1124, ball bearing
1F1273, bushing
8S8821, seal
2A4725, ball bearing
3B3985, Race

Thanks. keith

Yes, all impellers(you listed) are for water pumps.

Wish I knew somebody with a 3K1650 switch, mine hangs.😉

Going outta town, I'll catch the others tomorrow.