Welcome !!! lots of good and experienced people here when you need help. What part of SD?
just a bit north of neb and little east of the missouri river .
welcome to the club. Always happy to have new projects and problems to hear about. Don't be afraid to ask if you have a problem. Somebody out there has been there and or done that, and is usually more than willing to add input.
When I was working on my D4, they saved me quite a bit of unessary time and labor.
If you were involved with construction, you probably not totaly unfamiliar with mechanics. Nothing really too complicated with old stuff, just big and heavy!
Good luck with future projects and remember a picture is worth a thousand words.
D46U straight blade,D46U cat angle blade,allis chalmers AD4 grader and Khoering 404 dragline. D4C 40A,D4 2T and scraper.
welcome welcome. and pics or even better "movies" :high5:
Welcome!--Be aware that you are a guest member so you don't have all the benefits of a paid member
paid member and will get a pic when i get it home next week
Welcome to ACMOC and thanks for being a supporting member. Chapter 3 based in Minnesota is a very active ACMOC Chapter with a bunch of good folk. Its a bit of a drive for you but probably not much worse than some of us whom live up north. We would welcome you at any event.
I have spent many y hours in the internals of several D4 tractors, if I can help ask and I will do the best I can.
First the steering clutches , get a book and study adjust ment , take them up till no play and tie them back and drive around with the brakes on to make some heat and maybe they will come loose , good luck , [email protected]
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Two
| Avalanche adventure, Welford Rd, Sibbertoft LE16 9UJ, UKChapter Two
| Highacres Farm, Dewey Lane, Brackenfield, Derbyshire DE55 6DB, UKChapter Nineteen
| 2 Winkleigh Rd, Exeter TAS 7275
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N
