The 4M806 manifold was used on the D320T engines such as the 922 (59A loaders)
8H6877 & 8H3197 are exhaust manifolds for the D8H
2B3313 manifold was used on the 22 fuel system change over from tractor fuel to gasoline
9M444 = 6H8986 is an 8mm injection pump used on the 4-1/2" bore engines.
The 4M806 manifold was used on the D320T engines such as the 922 (59A loaders)
8H6877 & 8H3197 are exhaust manifolds for the D8H
2B3313 manifold was used on the 22 fuel system change over from tractor fuel to gasoline
9M444 = 6H8986 is an 8mm injection pump used on the 4-1/2" bore engines.
Thanks Old Magnet, hope you are keeping well, it’s been a while since my last visit,
I guessed the big manifolds were D8 but I don’t have any books to confirm that.
thanks again
Richard
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Nineteen
| 34 Henty Hwy, WarracknabealChapter Fifteen
| Placerville, CAChapter Two
| Stradsett, Nr Downham Market. Norfolk PE33 9HA UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N