Caterpillar 5U wide gauge direct electric start large front idler toolbar dozer. Tractor runs and drives very well. Tractor had the top end gone through this winter with head shaved/trued, all new glow-plugs, All new injector nozzles, new gaskets, new thermostat, new main clutch. $2k in just new parts alone. New hydraulic hoses from factory metal lines to hydraulic rams. Factory PTO with belt pulley attachment. Belly pan (no hook). Tractor starts great hot or cold. Cat 44 single spool front mounted pump. Can provide more pictures. Extremely original. 158XX serial number. $10,000; Greg Andrade 510-427-8095 or [email protected] (San Juan Bautista CA)
Caterpillar 60, complete, with blade, runs good, $10000; Don Chappell 503-397-0152 or cell 503-679-2726 or [email protected] (St Helens OR)
Caterpillar 60, have 2, make one, $6000 for both; Don Chappell 503-397-0152 or cell 503-679-2726 or [email protected] (St Helens OR)
Caterpillar 60, sn 4914, very good undercarriage, new rings & valve grind, new fenders, rebuilt vacuum tank, rebuilt carb & mag, ID tags are intact on the rear housing, drives excellent, $16000. Check our web site www.omnitrac.com; Dennis Wilkinson 541-568-4735 or [email protected] (Cove OR)
Caterpillar cable control, rear model 29, sn 31E, all controls, 2 drive shafts, one from 46A, one from D7E, 2 engine adapters from D6, D7E, nice; Jerry Kirschling 360-951-9777 or [email protected] (Rochester WA)
Caterpillar combine, early '30's, very restorable, $2500; Don Chappell 503-397-0152 or cell 503-679-2726 or [email protected] (St Helens OR)
Caterpillar D-2 5U, very nice, direct electric start, $6750; Don Chappell 503-397-0152 or cell 503-679-2726 or [email protected] (St Helens OR)
Caterpillar D2 belt pulley, $350; Greg Andrade 510-427-8095 or [email protected] (San Juan Bautista CA)
Caterpillar D2 J series: has four. One of the tractors are wide gauges and three are standard gauges. Four have the main engines loose. Asking $2500 for all five (actually 3.5 tractors) which is approaching scrap price but Rick is not a supporter of scrapping whole tractors and wants to sell to a party who may put one or more of the tractors to use in a restoration or as parts donors to another restoration; for details Rick Hawksworth 559-658-5711 or [email protected] (Ahwahnee CA)
Caterpillar D-4 7J, restorable, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or [email protected] (St Helens OR)
Caterpillar D4 belt pulley, $350; Greg Andrade 510-427-8095 or [email protected] (San Juan Bautista CA)
Caterpillar D4 parts: draw bar $15; fender $10; grill guard $10; sprocket assembly $15; loader bucket $25; Ron Nevins 530-474-3228 or [email protected] (Shingletown CA)
Caterpillar D4 parts: draw-bar $15, fender $10, grill guard $10, sprocket assembly $15, loader bucket $ 25; Ron Nevins 530-474-3228 or [email protected] (Shingletown CA)
Caterpillar D6 seat tank $45. Good condition, photos available; Ron Nevins 530-474-3228 or [email protected] (Shingletown CA)
Caterpillar D6, 1948, sn 8U806. Carco winch, canopy, blade. Running, working Cat, $3500; Chris Carl 425-218-1313 or [email protected] (Camano Island WA)
Caterpillar D8-14A starting motor trans; Jerry Kirschling 360-951-9777 or [email protected] (Rochester WA)
Caterpillar D8-46A transmission, model #7M825, out of sn 9 to 10 series; Jerry Kirschling 360-951-9777 or 360-273-8389 or [email protected] (Rochester WA)
Caterpillar pads: wide 24" conventional pads for D4/R4/30/28. Rails ok, not special. 64 pads total with tall grouser height and little wear. Slight pitting in some pads as these came from the south, $1500. Can provide pictures; Greg Andrade 510-427-8095 or [email protected] (San Juan Bautista CA)
Caterpillar parts: 4S straight blade, complete with hydraulics off D47U, $2750. Canopy for D4, $750; Cat D47U four roller track rails, 95%, has pads, but pads only 50%, D4N winch, complete, very good, $1500; Check our web site www.omnitrac.com; Dennis Wilkinson 541-568-4735 or [email protected] (Cove OR)
Caterpillar parts: D8 draw bars off D7E and D8-14A; Cat 24 volt generator, belts, reversible fan from 46A, sn 33000; carb off pony motor; generator 6 volt; starter 12 volt for pony motor; Cat track grease gun (volume compressor), book #7H1680 large button fitting; Cat draw bar pin; Jerry Kirschling 360-951-9777 or 360-273-8389 (Rochester WA)
Caterpillar parts: package D2/R2 guards, hydraulics, belly pan; I am packaging an R2/D2 Belly pan with a tow hook on it with a D2 hard nose-guard AND two cat 44 hydraulic pumps, 2 sets of lines from the pump to the cross-over pipe, two sets of cross-over pipes (fender to fender), two diverter values, one D2 mounting bracket, and one D2 pump to harmonic balancer coupling shaft. I think the pumps will need to be rebuilt. One does not turn currently. More discrete pictures available of the various parts. $1400. Greg Andrade 510-427-8095 or [email protected] (San Juan Bautista CA)
Caterpillar RD4, restorable, with tool bar blade, $1750; Don Chappell 503-397-0152 or cell 503-679-2726 or [email protected] (St Helens OR)
Caterpillar straight blade for D25U, complete with Cat hydraulics $2200. One after-market tilt angle blade, complete, for D25J or D25U series $1200. Check our web site www.omnitrac.com. Dennis Wilkinson 541-568-4735 or [email protected] (Cove OR)
Caterpillar used parts for Cat 10, 15, 20, 22, 30, 40, 60, D2, D4, 2 Ton, D2, D4, JD Lindeman and JD crawlers, some TD6 and TD9 parts. Dozers, canopies, belly pans and winches. Check our web site www.omnitrac.com; Dennis Wilkinson 541-568-4735 or [email protected] (Cove OR)
Caterpillar/Holt 2-ton sn 76028, good undercarriage, very straight, new paint & seats, original carb, drives very well, $6500. Check our web site www.omnitrac.com; Dennis Wilkinson 541-568-4735 or [email protected] (Cove OR)
Caterpillar: Large selection of antique caterpillar tractors Cat 10 thru 60, some restored, some ready to restore. Check our web site www.omnitrac.com; Dennis Wilkinson 541-568-4735 or [email protected] (Cove OR)
Lucky? You know where Caterpillar came from, right? 😄
Lucky? You know where Caterpillar came from, right? 😄
The stuff may be on the west coast but some of the prices are for another planet😮 😮
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Fifteen
| Placerville, CAChapter Nineteen
| 1234 Carngham-Lake Goldsmith Rd, Lake Goldsmith, Victoria, 3373, AustraliaChapter Two
| Stradsett, Nr Downham Market. Norfolk PE33 9HA UKChapter Two
| Faulkner Farm, West Drove, Wisbech, Cambridgeshire, PE14 7DP, UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N
