D6C 10k just bought it, need some help

Showing 1 to 9 of 9 results

Dutchboy

Topic Author

Offline

Send a private message to Dutchboy

Posts: 19

Thank you received: 0

I just purchased a 71 10k5884, seems to be a good machine and I have done a bunch of reading on this site. The machine seemed to have pretty low hours on it and it had been ran on a ranch its whole life. The hydraulic lines that go to the blade were rotten pretty bad, were still good but an eye sore. I had a buddy take all the hoses off and drop them off for me to get replaced, well, now I'm uncertain where they go, ha rookie mistakes, probably should have marked everything. Any help would be appreciated. I didnt know how to say what side they were on so I used "driver" and "passenger" to designate. Here is some pictures I took hopefully someone can help lol
Thanks in advance, God bless
Gary

Please log in or create an account to join the conversation.

Thu, Aug 30, 2018 4:34 AM

Dutchboy

Topic Author

Offline

Send a private message to Dutchboy

Posts: 19

Thank you received: 0

Ill figure out how to post pics when I get home lol

Please log in or create an account to join the conversation.

Thu, Aug 30, 2018 4:37 AM

Rome K/G

Offline

Send a private message to Rome K/G

Posts: 6,092

Thank you received: 0

Reply to Dutchboy:

Ill figure out how to post pics when I get home lol

"I dont have a whole lot to say about that"
Attachment

Please log in or create an account to join the conversation.

Thu, Aug 30, 2018 4:51 AM

Dutchboy

Topic Author

Offline

Send a private message to Dutchboy

Posts: 19

Thank you received: 0

Reply to Rome K/G:

"I dont have a whole lot to say about that"

[attachment=50510]sketch-1535577756242.jpg[/attachment][attachment=50511]sketch-1535577646060.jpg[/attachment][attachment=50512]sketch-1535577555593.jpg[/attachment][attachment=50513]sketch-1535577399615.jpg[/attachment][attachment=50514]sketch-1535577289625.jpg[/attachment][attachment=50515]sketch-1535577019380.jpg[/attachment]

Please log in or create an account to join the conversation.

Thu, Aug 30, 2018 4:54 AM

Dutchboy

Topic Author

Offline

Send a private message to Dutchboy

Posts: 19

Thank you received: 0

Reply to Rome K/G:

"I dont have a whole lot to say about that"

LoL sorry Im new to the community😆

Please log in or create an account to join the conversation.

Thu, Aug 30, 2018 4:55 AM

Deas Plant.

Offline

Member

Send a private message to Deas Plant.

Location: Currently - DowNunda.

Posts: 6,674

Thank you received: 24

Reply to Dutchboy:

LoL sorry Im new to the community😆

Hi, Dutchboy.
Welkum too ther 4um.

The one that is probably easiest to mess up with are the 'HO-zez' for the blade tilt rams - your 'drivers side' and 'passengers side' rams. If I am not 'miss-tooken', the front of either ram should be connected to the rear of the opposite ram so that you get a cross-over effect - 1 ram going in and the other ram going out.

Hope this helps.

Just my 0.02.

You have a wonderful day. Best wishes. Deas Plant.

Please log in or create an account to join the conversation.

Thu, Aug 30, 2018 2:45 PM

Dutchboy

Topic Author

Offline

Send a private message to Dutchboy

Posts: 19

Thank you received: 0

Reply to Deas Plant.:

Hi, Dutchboy.
Welkum too ther 4um.

The one that is probably easiest to mess up with are the 'HO-zez' for the blade tilt rams - your 'drivers side' and 'passengers side' rams. If I am not 'miss-tooken', the front of either ram should be connected to the rear of the opposite ram so that you get a cross-over effect - 1 ram going in and the other ram going out.

Hope this helps.

Just my 0.02.

[quote="Deas Plant."]Hi, Dutchboy.
Welkum too ther 4um.

The one that is probably easiest to mess up with are the 'HO-zez' for the blade tilt rams - your 'drivers side' and 'passengers side' rams. If I am not 'miss-tooken', the front of either ram should be connected to the rear of the opposite ram so that you get a cross-over effect - 1 ram going in and the other ram going out.

Hope this helps.

Just my 0.02.[/quote]

Thank you, Ill try it, Thank you if anyone else will chime in it will make me feel better lol

Please log in or create an account to join the conversation.

Wed, Sep 5, 2018 4:43 AM

nomorejohndeere

Offline

Send a private message to nomorejohndeere

Posts: 341

Thank you received: 0

Reply to Dutchboy:

[quote="Deas Plant."]Hi, Dutchboy.
Welkum too ther 4um.

The one that is probably easiest to mess up with are the 'HO-zez' for the blade tilt rams - your 'drivers side' and 'passengers side' rams. If I am not 'miss-tooken', the front of either ram should be connected to the rear of the opposite ram so that you get a cross-over effect - 1 ram going in and the other ram going out.

Hope this helps.

Just my 0.02.[/quote]

Thank you, Ill try it, Thank you if anyone else will chime in it will make me feel better lol

who shot JR?

Please log in or create an account to join the conversation.

Wed, Sep 5, 2018 7:44 AM

Dutchboy

Topic Author

Offline

Send a private message to Dutchboy

Posts: 19

Thank you received: 0

Reply to nomorejohndeere:

who shot JR?

Come on man, everyone knows Kristen did it, and Jim Brown helped her flee in a white bronco..

Please log in or create an account to join the conversation.

Wed, Sep 5, 2018 9:29 PM

Rome K/G

Offline

Send a private message to Rome K/G

Posts: 6,092

Thank you received: 0

Reply to Dutchboy:

Come on man, everyone knows Kristen did it, and Jim Brown helped her flee in a white bronco..

" Now I'm all confused!"
Attachment

Please log in or create an account to join the conversation.

Thu, Sep 6, 2018 12:37 AM

Showing 1 to 9 of 9 results

Upcoming Events

View Calendar

D6C 10k just bought it, need some help

Follow Us on Social Media

Upcoming Events

10th Annual Best of the West

ACMOC Chapter 30 - Celebrating 100 Years of Caterpillar

Newby Hall Tractor Fest

High Weald Steam Working Weekend

Testimonials