ACMOC
Login
ACMOC
D2 lives!

D2 lives!

Showing 1 to 7 of 7 results
55D25U
Topic Author
Offline
Send a private message to 55D25U
Posts: 23
Thank you received: 0
So I got my fuel issue figured out, just clogged lines like I thought. Pressurized the system like a lot of you mentioned and fired right up! Got It out today and found the right clutches were frozen. Did some research on this page and saw a lot of people were putting diesel in there. Sure enough I drained a bunch of water and crap out of there and poured about a gallon of diesel in each one. About 20 minutes of jerking on the clutch and It started squealing and then finally let go! I wish there was a way to post videos. The wife and kids came to bring me lunch so I stopped and took some pictures. Thanks again for everyone’s help! This page is amazing. I hope to learn more from you guys! I couldn’t have made It this far without you fellas.
Attachment
Attachment
Attachment
Attachment
Attachment
Please log in or create an account to join the conversation.
Wed, Oct 31, 2018 8:18 AM
juiceman
Offline
Member
Chapter Leader
Super Admin
Chapter Fifteen
Send a private message to juiceman
Posts: 3,810
Thank you received: 237
Hey that’s great 55! Maybe the old girl is a little stiff from sitting. Glad you got her going again. CATs are amazing. JM
Please log in or create an account to join the conversation.
Wed, Oct 31, 2018 9:18 AM
ccjersey
Offline
Send a private message to ccjersey
Posts: 4,422
Thank you received: 0
Looks like you could use a bigger model with a bench seat for the kids to ride!.

That disk is just what most old tractors need........some hard work to deglaze the cylinders, seat the rings and limber up the steering clutches.
D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time😄
Please log in or create an account to join the conversation.
Wed, Oct 31, 2018 6:27 PM
Crawler Dollars
Offline
Member
Send a private message to Crawler Dollars
Posts: 344
Thank you received: 0
Reply to ccjersey:
Looks like you could use a bigger model with a bench seat for the kids to ride!.

That disk is just what most old tractors need........some hard work to deglaze the cylinders, seat the rings and limber up the steering clutches.
Nice job 55'! Looks like a good time was had by all...the kids, the Cat and you!
Please log in or create an account to join the conversation.
Wed, Oct 31, 2018 7:08 PM
Ray54
Offline
Member
Send a private message to Ray54
Posts: 2,063
Thank you received: 43
Reply to Crawler Dollars:
Nice job 55'! Looks like a good time was had by all...the kids, the Cat and you!
Good to see things working. Get the next generation driving as soon as they can pull the levers. Cause it seems you steering clutches need a little more use so they stay free.
Please log in or create an account to join the conversation.
Wed, Oct 31, 2018 10:17 PM
55D25U
Topic Author
Offline
Send a private message to 55D25U
Posts: 23
Thank you received: 0
Reply to Ray54:
Good to see things working. Get the next generation driving as soon as they can pull the levers. Cause it seems you steering clutches need a little more use so they stay free.
My dad taught me to operate that tractor when I was around 10 or so, and soon I will be taking over the property, and my boys will be running that same tractor on the same property as I have, and will continue to be passed on.

We used to have an old 1944 D7 with the original US Army tag on the fender, and when I was young my dad sold It to a neighbor for $500, and It continues to sit there to this day. In the next couple days I want to get over there and see if I can get It back, since he hasn’t done anything with It.
Please log in or create an account to join the conversation.
Thu, Nov 1, 2018 4:53 AM
Rodten
Offline
Send a private message to Rodten
Posts: 343
Thank you received: 0
Reply to 55D25U:
My dad taught me to operate that tractor when I was around 10 or so, and soon I will be taking over the property, and my boys will be running that same tractor on the same property as I have, and will continue to be passed on.

We used to have an old 1944 D7 with the original US Army tag on the fender, and when I was young my dad sold It to a neighbor for $500, and It continues to sit there to this day. In the next couple days I want to get over there and see if I can get It back, since he hasn’t done anything with It.
Otohh I feel another case of yellow fever has popped up. Great job 55 get those kids hooked too. I also recommend becoming a member of the ACMOC as not only do you get to enjoy this website but also the newsletter throughout the year, plus you also get discounts on the store side of this website. Enjoy and become a member, just go to the stir side and purchase your membership.

Thanks for the pics,
Rodten
Please log in or create an account to join the conversation.
Thu, Nov 1, 2018 6:56 AM
d4e
Offline
Member
Send a private message to d4e
Posts: 490
Thank you received: 0
Reply to Rodten:
Otohh I feel another case of yellow fever has popped up. Great job 55 get those kids hooked too. I also recommend becoming a member of the ACMOC as not only do you get to enjoy this website but also the newsletter throughout the year, plus you also get discounts on the store side of this website. Enjoy and become a member, just go to the stir side and purchase your membership.

Thanks for the pics,
Rodten
Nice Cat, You have a nice disc to make it work and loosen things up.Glad to see it working again
Please log in or create an account to join the conversation.
Thu, Nov 1, 2018 9:02 AM
Showing 1 to 7 of 7 results
YouTube Video Placeholder

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.

Upcoming Events

Lake Goldsmith 127th Rally

Chapter Nineteen

| 1234 Carngham - Lake Goldsmith Road ​Lake Goldsmith VIC 3373

HIGRO JUBILEUMEDITIE!

| “De Domelaar” Gebr .V.d. Heiden Domelaarsweg 3 7475 MARKELO Netherlands

Chapter 2 AGM

Chapter Two

| Folds Farm, Godshillwood, Fordingbridge, Hampshire, SP6 2LU
View Calendar
ACMOC

Antique Caterpillar
Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

[email protected]

Terms & Privacy
Website developed by AdCo

Testimonials

"I became a member recently because the wealth of knowledge here is priceless." 
-Chris R

Join Today!