D2 Lettering

ACMOC sells the correct decals. Call the office at 309-691-5002 with the serial number of your tractor. GWH

There is only 1 proper way and that is to order a 100% corect and acurate set from ACMOC for a little over 100 bucks as GWH sugested but be sure when you call you have the ser.no. as they changed thruout production of the D2

If you don't want to spend $100, take a picture book to some place like FastSigns and get some vinyl lettering made. The letter sizes are in the back of the D2 parts book. They can match up the font pretty good if you have some decent pictures for them to go by. I go the cheaper route and just get the minimum amount of lettering made at a sign place (seat, hood). Would be half the price, but you won't have all the warning labels and such.

it might be cheaper to go another way but then you will not be supporting ACMOC.

Do you have to be a member to order thru ACMOC?

Matt

No, Matt. We sell to the public. GWH

Any photos of the ACMOC decals? the ones I got a few years back were not very good.Just wondered if the quality has improved.
This is my D2 I restored about 12 years ago.The chap in the seat is the son of the original owner.He last drove it in 1957 ! When I started it up and let him drive it,he was a bit overcome,with a tear welled up in his eyes as it brought back so many memories.
This makes the hobby worth while.

I bought 22 decals from ACMOC and the qaulity was was great and you not only get the big lettering you get all the little instruction stuff and the one that goes on back of seat Heres one with ACMOC decals John Hahn seats and some George Rankin sheet metal and a Richie Brothers paint job