There is a SN tag on the engine block just above the starting engine transmission & below the back head so take a look there. The only thing is if the engine was swapped around it wouldn,t be the correct SN.
Steved73t,
I'm interested in the rails(chains) , rollers, and anything else related. Would there be a price? Thanks.
Packrat
I'll check with my buddy. He said scrap is about 2-3 hundred per ton. I don't know how much of a premium they want for handling.I'll call him tonight.
Check and see if you can get the tranny and pinion taken out. I need your number to give to a guy whi is looking fr at least the pinion.
[email protected]
I talked to them today, they want 25 cents a pound for parts. I measured the rails , they are between 4 5/8 and 4 3/4 inches high. You can email me at [email protected] and we can exchange phoine #s.
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Fifteen
| Placerville, CAChapter Nineteen
| 1234 Carngham-Lake Goldsmith Rd, Lake Goldsmith, Victoria, 3373, AustraliaChapter Two
| Stradsett, Nr Downham Market. Norfolk PE33 9HA UKChapter Two
| Faulkner Farm, West Drove, Wisbech, Cambridgeshire, PE14 7DP, UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I became a member recently because the wealth of knowledge here is priceless."
-Chris R