Chapter 18 meeting and Auction

Showing 1 to 10 of 65 results

Andrew

Topic Author

Offline

Send a private message to Andrew

Posts: 886

Thank you received: 0

Chapter 18 meeting and auction update.
Sunday the 28th February is coming up fast, being the date for Chapter 18 meeting and spare parts auction.
Most will know Chapter 18 members purchased all the parts from the Thiess family left over when the collection belonging to the late Bert Thiess moved to the Ipswich rail museum for permanent display.
Lance has covered the auction items in a previous email.
The meeting and auction will be held at the Kennedy family property at 100 cornford rd Southbrook 4363.
Your phone or GPS should get you there other wise Find your way to Southbrook and turn on to the Southbrook Felton rd.This is the only road that crosses the rail line in the village.travel south 1km and turn left onto Cornford rd.
The property" Sunrise " is first on the right 1km from the corner..
Biddeston Tractor Pull will be held on the 26th & 27th. This is near by and would make a great long weekend for enthusiasts .The address for the tractor pull is 477 Oakey Crosshill rd Biddeston QLD. Camping is available at the Biddeston site.There is an advert in the last two editions of the
QLD Country Life.

Program for Sunday : Meeting at 11am followed with a BBQ lunch at 12 and auction to start at about 1pm.
Toilet facilities and shower available on site and any one is welcome to camp . Bring your sleeping bag or swag
There will be a small charge for sunday lunch and BBQ facilities will be available for use for the rest of the weekend as required on a BYO basis. There will be a few of us here for Saturday Night.All welcome to join in.
If more information is required please contact either Lance or myself via email or call 0428717065.
Andrew Kennedy..

Please log in or create an account to join the conversation.

Thu, Feb 18, 2016 5:25 PM

mrsmackpaul

Offline

Send a private message to mrsmackpaul

Posts: 1,456

Thank you received: 0

should be a good day or two???? see you Saturday arvo

Paul

Please log in or create an account to join the conversation.

Thu, Feb 18, 2016 7:09 PM

Mike Meyer

Offline

Member

Send a private message to Mike Meyer

Posts: 3,325

Thank you received: 4

Reply to mrsmackpaul:

should be a good day or two???? see you Saturday arvo

Paul

Hi Andrew, what parts are being auctioned?
Regards
Mike

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 3:47 AM

Deas Plant.

Offline

Member

Send a private message to Deas Plant.

Location: Currently - DowNunda.

Posts: 6,670

Thank you received: 22

Reply to Mike Meyer:

Hi Andrew, what parts are being auctioned?
Regards
Mike

Hi, Mike Meyer.
Mainly Holt-Cat 2-Ton, Cat 10, 15. 20, 22, 30, D2, D4, D6, D7, D8, including some track frames and chains for a 2-Ton and a frame and engine for Cat 15 - I think - along with several lots of tools. Around 70 lots in all.

Hope this helps.

You have a wonderful day. Best wishes. Deas Plant.

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 4:26 AM

Mike Meyer

Offline

Member

Send a private message to Mike Meyer

Posts: 3,325

Thank you received: 4

Reply to Deas Plant.:

Hi, Mike Meyer.
Mainly Holt-Cat 2-Ton, Cat 10, 15. 20, 22, 30, D2, D4, D6, D7, D8, including some track frames and chains for a 2-Ton and a frame and engine for Cat 15 - I think - along with several lots of tools. Around 70 lots in all.

Hope this helps.

Hi Deas, are there photo's available of the parts?
Thanks
Mike

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 5:10 AM

Deas Plant.

Offline

Member

Send a private message to Deas Plant.

Location: Currently - DowNunda.

Posts: 6,670

Thank you received: 22

Reply to Mike Meyer:

Hi Deas, are there photo's available of the parts?
Thanks
Mike

Hi, Mike and all.
Here are photos of the existing pallet lots as they stood a month ago. Some of us are going to go through them again on Saturday 27th to split them up a bit and probably end up with around 70 lots. Not shown in these photos are the 'small pieces and small tools' lots stored in Andrew's shed, maybe around another 20 lots, which are part of the approx. 70 lots total.

[attachment=33830]15.jpg[/attachment][attachment=33843]13.jpg[/attachment][attachment=33842]12.jpg[/attachment][attachment=33841]11.jpg[/attachment][attachment=33840]10.jpg[/attachment][attachment=33839]09.jpg[/attachment][attachment=33838]08.jpg[/attachment][attachment=33837]07.jpg[/attachment][attachment=33836]06.jpg[/attachment][attachment=33835]05.jpg[/attachment][attachment=33834]04.jpg[/attachment][attachment=33833]03.jpg[/attachment][attachment=33832]02.jpg[/attachment][attachment=33831]01.jpg[/attachment][attachment=33844]14.jpg[/attachment]

Hope this helps.

You have a wonderful day. Best wishes. Deas Plant.

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 6:10 AM

Mike Meyer

Offline

Member

Send a private message to Mike Meyer

Posts: 3,325

Thank you received: 4

Reply to Deas Plant.:

Hi, Mike and all.
Here are photos of the existing pallet lots as they stood a month ago. Some of us are going to go through them again on Saturday 27th to split them up a bit and probably end up with around 70 lots. Not shown in these photos are the 'small pieces and small tools' lots stored in Andrew's shed, maybe around another 20 lots, which are part of the approx. 70 lots total.

[attachment=33830]15.jpg[/attachment][attachment=33843]13.jpg[/attachment][attachment=33842]12.jpg[/attachment][attachment=33841]11.jpg[/attachment][attachment=33840]10.jpg[/attachment][attachment=33839]09.jpg[/attachment][attachment=33838]08.jpg[/attachment][attachment=33837]07.jpg[/attachment][attachment=33836]06.jpg[/attachment][attachment=33835]05.jpg[/attachment][attachment=33834]04.jpg[/attachment][attachment=33833]03.jpg[/attachment][attachment=33832]02.jpg[/attachment][attachment=33831]01.jpg[/attachment][attachment=33844]14.jpg[/attachment]

Hope this helps.

Thanks Deas, if there are any photo's of the other small parts and tools I'd appreciate seeing them at some stage.
Regards
Mike

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 6:39 AM

Deas Plant.

Offline

Member

Send a private message to Deas Plant.

Location: Currently - DowNunda.

Posts: 6,670

Thank you received: 22

Reply to Mike Meyer:

Thanks Deas, if there are any photo's of the other small parts and tools I'd appreciate seeing them at some stage.
Regards
Mike

Hi, Mike Meyer.
Cain't help with that in time for it to be of much use to you, M8. I won't be back up there until the afternoon of Saturday 27th, the day before the auction. Andrew may be able to help if he is at home.

Velly solly. Boss.

You have a wonderful day. Best wishes. Deas Plant.

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 8:31 AM

keloz

Offline

Member

Send a private message to keloz

Posts: 78

Thank you received: 0

Reply to Deas Plant.:

Hi, Mike Meyer.
Cain't help with that in time for it to be of much use to you, M8. I won't be back up there until the afternoon of Saturday 27th, the day before the auction. Andrew may be able to help if he is at home.

Velly solly. Boss.

jumping on the kero kangaroo mike and coming up?

Please log in or create an account to join the conversation.

Fri, Feb 19, 2016 4:02 PM

Andrew

Topic Author

Offline

Send a private message to Andrew

Posts: 886

Thank you received: 0

Reply to keloz: