ACMOC
Login
ACMOC
Auction goodies

Auction goodies

Showing 1 to 10 of 12 results
1
juiceman
Topic Author
Offline
Member
Chapter Leader
Super Admin
Chapter Fifteen
Send a private message to juiceman
Posts: 4,078
Thank you received: 291

Who doesn’t love a good auction?

Is it the thrill of finding a treasure or accumulating things we might “need” for future projects?

I went to a local estate sale of sorts and had the pleasure of socializing with other purchasers. Buzz Stetler from Stockton, CA and the infamous Gary Berrington from Nevada. We got a chuckle out of what we didn’t get and applauded some folks that made some very nice deals.

I didn’t wish to pay so much for the pallet of cutting edges, but they were still inexpensive and I have a use for them. There’s an old Chinese saying in regards to a big platter of Chow Mein: “The good stuff is on the bottom”…This case being the extra stuff I w

asn’t expecting, but belong in my parts stash as well. Some thermoids, pinion latches, pony starter pinion and WHAT are these bushings for? Rubberized, two sizes. Any ideas? Asking the experts! TIA. JM

Please log in or create an account to join the conversation.
Tue, Oct 13, 2026 3:30 PM
juiceman
Topic Author
Offline
Member
Chapter Leader
Super Admin
Chapter Fifteen
Send a private message to juiceman
Posts: 4,078
Thank you received: 291
Please log in or create an account to join the conversation.
Tue, Oct 13, 2026 3:31 PM
Old Magnet
Offline
Send a private message to Old Magnet
Posts: 16,822
Thank you received: 66

If those are rubber covered springs they go in the front idler bearing blocks.

Please log in or create an account to join the conversation.
Tue, Oct 13, 2026 4:51 PM
brian18a
Offline
Member
Send a private message to brian18a
Posts: 383
Thank you received: 70

The rubber things go in idler yokes, they hold the plate down that rides on top of track frame. maybe D6 or D7? Most of the thermoids are in bad shape. Good thing I resisted bidding.

Please log in or create an account to join the conversation.
Tue, Oct 13, 2026 4:52 PM
neil
Offline
Member
Moderator
Admin
Super Admin
Send a private message to neil
Posts: 7,415
Thank you received: 78

I bought new "springs" for my D2 idler blocks and they look the same, just smaller I guess. They just look like a piece of rubber tube with holes in it for "give"

Please log in or create an account to join the conversation.
Tue, Oct 13, 2026 10:46 PM
juiceman
Topic Author
Offline
Member
Chapter Leader
Super Admin
Chapter Fifteen
Send a private message to juiceman
Posts: 4,078
Thank you received: 291

I think I paid too much, but it still comes out to $60 per edge, and I have a purpose for them. The pinion latches don't take up any space; the pinion was unused as well, just rusty from the elements. It makes one wonder where this stuff came from originally. The things I do for entertainment. I got to visit with my friend with the pink hair at check-out as well, so it was worth the trip!

Please log in or create an account to join the conversation.
Fri, Oct 16, 2026 2:38 PM
D8Dude
Offline
Member
Chapter Nineteen
Send a private message to D8Dude
Posts: 266
Thank you received: 28

If those pinion latches are in good condition, you are probably still in front, they weren't cheap when I had to buy one a couple of years ago. I can't imagine that they have come down in price.

Please log in or create an account to join the conversation.
Sat, Oct 17, 2026 9:31 PM
juiceman
Topic Author
Offline
Member
Chapter Leader
Super Admin
Chapter Fifteen
Send a private message to juiceman
Posts: 4,078
Thank you received: 291
Reply to D8Dude:

If those pinion latches are in good condition, you are probably still in front, they weren't cheap when I had to buy one a couple of years ago. I can't imagine that they have come down in price.

Surface rust is all. Unused. I don’t think I’ve ever had to buy a pair of latches, but they went into my parts stash.

I tossed the thermoids that were separated. Aside from the rusty bands, they look okay to use.

Time to dig into parts books and make note of what some of that stuff fits. The 2 springs are a mystery too. Time to measure them.

Please log in or create an account to join the conversation.
Sun, Oct 18, 2026 1:17 AM
D8Dude
Offline
Member
Chapter Nineteen
Send a private message to D8Dude
Posts: 266
Thank you received: 28

When I got into it, one of my D8's was missing just one latch. From memory, one is quite a bit more expensive than the other, of course the one I was missing was the more expensive part. Are the springs one inside the other? The spring in the picture looks a lot like the spring that goes inside the pinion shaft to eject the pinion from the flywheel on throwout if I'm not mistaken.

Please log in or create an account to join the conversation.
Sun, Oct 18, 2026 6:39 AM
juiceman
Topic Author
Offline
Member
Chapter Leader
Super Admin
Chapter Fifteen
Send a private message to juiceman
Posts: 4,078
Thank you received: 291

Yes, one spring is inside the other. Thanks for sharing. I appreciate the comments. Obviously there are many parts that I am not yet familiar with. I put everything in my parts stash. If a friend needs anything, all I have to do is remember what rack I placed them on! JM

Please log in or create an account to join the conversation.
Wed, Oct 21, 2026 10:06 AM
neil
Offline
Member
Moderator
Admin
Super Admin
Send a private message to neil
Posts: 7,415
Thank you received: 78

Would someone explain the logic of using two springs vs. one spring. I'd imagine that the two springs' rate combined could add up to the rate of a single spring but that's just a guess

Please log in or create an account to join the conversation.
Wed, Oct 21, 2026 2:52 PM
Showing 1 to 10 of 12 results
1
YouTube Video Placeholder

Follow Us on Social Media

Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.

Upcoming Events

View Calendar
ACMOC

Antique Caterpillar
Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

[email protected]

Terms & Privacy
Website developed by AdCo

Testimonials

"I became a member recently because the wealth of knowledge here is priceless." 
-Chris R

Join Today!