Old Magnet has all the info on the conversion. He should be along shortly. What are you doing with the pony? You have the number for the prechambers and glow plugs?
For the 8T big hole center location...
Outside of clutch housing to center of hole = 3.4825"
From top of housing where pony sits to center of hole =10.3125"
Also requires a RH helix starter drive.
Old Magnet has all the info on the conversion. He should be along shortly. What are you doing with the pony? You have the number for the prechambers and glow plugs?
[quote="Old Magnet"]For the 8T big hole center location...
Outside of clutch housing to center of hole = 3.4825"
From top of housing where pony sits to center of hole =10.3125"
Also requires a RH helix starter drive.[/quote]
Thank you very much Old Magnet I really appreciate your help!!! The other problem I’m having is I thought the starter came with the right hand helical cut pinion gear that’s what Delco Remy told me and it does not now I’m having trouble finding one for the 42MT starter any advice would greatly be appreciated
Seems the RH helical drive sources have dried up, at least the ones I know about.
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Two
| Freshfield Farm, Sloop Lane, Scaynes Hill RH17 7NP UKChapter Two
| Avalanche adventure, Welford Rd, Sibbertoft LE16 9UJ, UKChapter Two
| Highacres Farm, Dewey Lane, Brackenfield, Derbyshire DE55 6DB, UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N