First check if it fits in the dash ok & then if the other end thread is the same to attach to the drive. Also check & see if the drive is the same RPMs on both by turning the main engine over one turn & see if the cable drives are say 1/2 RPMs or whatever they,re geared at.It seems older engine drives were half engine speed if I recall but not sure anymore on one of them. Also make sure the drive cable is long enough unless the original can be used.
Neil,
Any pictures of the new arrival for the BB?
David
Not as yet David,hopefully within the next two weeks
Neil
A 627 with a working tachometer? You must really spoil your operators, Ive been running the B models for 14 years and have only seen 1 that worked!
We need proof they exist!LOL!
alan627b
Hi Alan
I bought this machine last year and am looking for a second one for some work that we have coming up. We are getting the machine ready for this work and as I will be driving it I wanted it in as good a condition as possible.
Somehow I knew someone like you would come on the board with those remarks!!!!!! Do you know why the tachos never work? Because the price of a new one is £568 which I suppose is $1000, what a rip-off.
Contact me at [email protected]
Neil
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Nineteen
| 5875 STH GIPPSLAND HWY, NYORAChapter Thirty
| Booleroo Centre, 54 Arthur St, Booleroo Centre SA 5482, AustraliaChapter Fifteen
| Tulare, CaliforniaChapter Nineteen
| 34 Henty Hwy, Warracknabeal
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
-Jason N
