Might have that book, or a similar vintage. Will look for it
Stephen, Thanks for your help.
This job may morph into a rebuilt front end,....blast what I can and lay down some paint while I wait for bushings and seals.
Thanks again
CMD
When re-bushing, be sure to align your bushing holes to the grease zerk fitting. Sounds easy but have seen a few put together wrong.
When re-bushing, be sure to align your bushing holes to the grease zerk fitting. Sounds easy but have seen a few put together wrong.
From: Form UE032687 replaces Form 32367
Caterpillar No. 212 motorgrader
9T1 to 9T5220 inclusive
The image quality is a bit poor, if you need some clarification I will try to help
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Nineteen
| 34 Henty Hwy, WarracknabealChapter Fifteen
| Placerville, CAChapter Two
| Stradsett, Nr Downham Market. Norfolk PE33 9HA UK
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I became a member recently because the wealth of knowledge here is priceless."
-Chris R