Is that the right gasket? I looked up the 13A and 2U. They both use a 1F4089 front gasket but the 13A uses a 4F0726 rear gasket and the 2U uses a 1F4090. I can't tell where the front/rear gasket splits? Just a thought.
edit: seems the gasket splits at the rear pan section so the gaskets should be the same for both units.
Maybe you can splice in the missing section of gasket.
The gasket I have is 7h1997 florin got me because they said the front and rears were discontinued. I just ordered a. 4m4409 which is what was on it... I found the part number stamped in the old gasket. Hopefully it's right it's been one thing after another and would be nice to be able to just put this thing back together.
Thanks Jesse
????4M4409 says it's for a D342?.
I wonder if a 14a oil pump gasket would work there
Cat said the 4m4409 is for a D342 but that's what my original was. Hopefully it works. Should be on the dock tomorrow and I can start putting this thing back to gather.
Thanks Jesse
Our channel highlights machines from the earliest Holt and Best track-type tractors, equipment from the start of Caterpillar in 1925, up to units built in the mid-1960s.
Chapter Nineteen
| Cnr Hiller Lane and Ballarat Road, Hamilton, Vic, 3300Chapter Two
| Pitt Farm, Little Paxton, St Neots, Cambridgeshire, PE19 6HD, UKChapter Fifteen
| Historic Santa Margarita Ranch, 20000 El Camino Real, Santa Margarita, CA 93453, USAChapter Thirty
| Hartley - South Australia
Antique Caterpillar
Machinery Owners Club
1115 Madison St NE # 1117
Salem, OR 97301
Terms & Privacy
Website developed by
AdCo
"I became a member recently because the wealth of knowledge here is priceless."
-Chris R