The 9Kxxxx series uses the D4600 and would have the same direct start arrangement as the D6-9U if it has flywheel housing provision for the starter, except there is no provision for glow-plugs with the earlier pre-combustion chambers. Where direct start was provided the D4600 used a manifold heater for pre-heat.
thansk old magnet. would the newer D4600 have electric start that you can buy off the parts counter??
thansk
KoO
Published Author
If you can find one of the old original inertia drive type starters 24v, then yes it is sort of an over the counter unit, otherwise it's a conversion like you've done on the D318's.