acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Caterpillar 20 wheel tractor.

More
17 years 9 months ago #3288 by josh
Pictures of a Twenty on wheels, built by Cat for test purposes?

Please Log in or Create an account to join the conversation.

More
17 years 9 months ago #3290 by biggastractor
Wow, Neat picture. could someoe comment on the steering of that prototype? Do I see steering rods going to the front axle? Or was it just clutches and brakes like normal?
Thanks for posting
Biggastractor

Please Log in or Create an account to join the conversation.

More
17 years 9 months ago #3292 by 2HIGHTEN
Replied by 2HIGHTEN on topic wheels
I have a ten that was converted at old cat dealership , to rubber tires.
It has 24 inch tires on the rear and i6 inch on the front, used a steering sector and linkage to steer, the brakes were reconstructed to cable control and release steer clutch and then if apllied further apply the brake to each side seperately, I brought this tractor from the man that used it for many years and helped to reconstruct it, He said it worked really well and would pull two 14 inch plows easily. It is complete and would be easy to restore
questions or comments call Ron Meeder 716-761-6447.

Please Log in or Create an account to join the conversation.

More
17 years 9 months ago #3341 by R4catkid
Replied by R4catkid on topic any pics?
any pics of your wheeled ten???
Thanks, -R4catkid

Please Log in or Create an account to join the conversation.

More
17 years 9 months ago #3344 by 2HIGHTEN
Replied by 2HIGHTEN on topic ten
I will locate some from when we purchased this tractor, It has been a while ,so give me a day or so. The man said they built it at the dealership during the war because of shortages or steel and they wanted a faster way to get things done He also said it worked well I may restore it on wheels someday.

Please Log in or Create an account to join the conversation.

More
17 years 8 months ago #3420 by KJM
Replied by KJM on topic ten
Ron what would you like to get out of the wheeler ten? what part of new york is ripley in? thanks kyle 914.474.7621

Please Log in or Create an account to join the conversation.

Time to create page: 0.164 seconds
Go to top