Pins and Bushes for Cat 15

Dave Tennent
Topic Author
Offline
Senior Boarder
User

15 years 11 months ago #23860 by Dave Tennent

Pins and Bushes for Cat 15 was created by Dave Tennent

The strip down of the 15 is going well. Does anyone know of a source of Track Pins and Bushes for a 15? The rails are OK and the sprockets are good but P&Bs are pretty tired.

Please Log in or Create an account to join the conversation.

WyoCat
Offline
Platinum Boarder
User

15 years 11 months ago #23861 by WyoCat

Replied by WyoCat on topic Pins and Bushes for Cat 15

Are you working on a PV or a 7C fifteen?

Chad Enyeart

Please Log in or Create an account to join the conversation.

Dave Tennent
Topic Author
Offline
Senior Boarder
User

15 years 11 months ago #23863 by Dave Tennent

Replied by Dave Tennent on topic Pins and Bushes for Cat 15

Cat 15 S/N PV2532

Please Log in or Create an account to join the conversation.

WyoCat
Offline
Platinum Boarder
User

15 years 11 months ago #23925 by WyoCat

Replied by WyoCat on topic Pins and Bushes for Cat 15

I am not sure who has pins and bushings available for this. If my memoery serves me correctly, I think the pins and bushings are the same for the PV 15, 8C 20, 22 and D2. If I am wrong, please let me know. Hopefully this helps.

Chad Enyeart

Please Log in or Create an account to join the conversation.

Catmatt
Offline
Elite Boarder
Member

15 years 11 months ago #23938 by Catmatt

Replied by Catmatt on topic Pins and Bushes for Cat 15

You are right chad, and they are all discontinued. I may have an entire set of tracks but I will have to check.
email me at <a href="This email address is being protected from spambots. You need JavaScript enabled to view it." target="_blank">This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in or Create an account to join the conversation.

ACMOC

Antique Caterpillar Machinery Owners Club

1115 Madison St NE # 1117
Salem, OR 97301

support@acmoc.org

Chapters History Events Members Contact

Member Quick Links:

Store Forum

Become a Member!

"I became a member recently because the wealth of knowledge here is priceless."
- Chris R

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N

ACMOC Membership Benefits

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Pins and Bushes for Cat 15

ACMOC