I am new to the forum and am a member of the Ogema Heritage Railway Association in Ogema, Saskatchewan, Canada.

We have a 1945 GE 44 tonner locomotive we use to operate a short tourist line in the summer. It have 2 D17000 engines. It is formerly from Conway Scenic Railroad in New Hampshire and was originally #15 with Maine Central Railroad 

We are currently overhauling the heads on one engine and are trying to do what we can on the injectors but parts of limited. Spray pattern s are very sloppy on all of them. I'm not a mechanic myself, but handy enough. The diesel shop that's looking at the injectors is asking for specs to provide guidance in lapping some of the surfaces. We have an operator's and parts manual and can't seem to find anything in them for this type of spec.

Any direction or comments would be greatly appreciated. Serial number on engine is 3S1102 SP.

Welcome!!! Someone will have the info for you soon. Those are common injectors for that bore size engine and others.

The diesel shop clarified that they are looking for opening pressure and valve lift. Thanks

I have the psi but not the lift.
 

Thank you for that. What type of manual is this located in?

The lift for the nozzles is 0.007"
Found in the Fuel pump and injector test equipment manual. Form #5683-A

I'm impressed by the speedy response. Thank you so much. Is this manual available anywhere that you know of??

My mechanic asked if it's listed anywhere in "turns". Seems like that's what he was expecting.

Is this any help?

That should likely do it! Thank you very much for the responses everyone